Your attatchment failed.
Op
There is a new issue mel found with retarding timming due to inlet psi.
Not huge but...
Op
There is a new issue mel found with retarding timming due to inlet psi.
Not huge but...
Your attatchment failed.
Op
There is a new issue mel found with retarding timming due to inlet psi.
Not huge but...
Agnem
Aka mel
Did some math.
I read it here.
Brb.
FWIW: The Facet website lists the operating pressure of pump number 40237 at 9-11 PSI.
There are a couple that run right at 4-7 PSI listed as well
Why not just install a pump that operates at the right pressure?
http://www.facet-purolator.com/dura-lift-pumps.php
You guys are ignoring the fact that a pump listed at 9-11 pounds static (no fuel flow) only puts out 5-6 psi with the engine running (at idle). This is due to the bypass of the filter, use by the engine, bypass of the injection pump, and the bypass of the injectors.