Do i need some gasgets etc. when i remove/install turbo

[kpj]

Well, i'm about to start removing the turbo and install parts i bought from ATS and i haven't ever removed one from these engines. So i was wondering that is there some gasgets or some other parts that i should be buying before i start taking it off. There's a guy who looks into that turbo to check is everything ok, so i don't need to know parts that are inside the turbo, just the parts or gasgets around the turbo.

Thanks in advance...

 

[GenLightening]

The grommet in the valley pan should be looked at to see if it's still good, and maybe the o-ring/gasket for the drain tube. That's pretty much it.

 

[Agnem]

If you end up taking the drain tube off the turbo, there is usually a paper gasket in that joint.

 

[kpj]

Thanks for both. That's good to hear, it's always frustrating if you'll get something removed and after that notice you'll need to order some parts...