I have been talking to an engine rebuilder, and was ready to drop off my heads tomorrow to get the, worked over.
Got them out and had a good close look at them. The back two cylinders on both heads have a hairline crack between the valves.
Are they boat anchors?
I really don't want to drive them to the machine shop if they are. It is about an hour drive one way.
Got them out and had a good close look at them. The back two cylinders on both heads have a hairline crack between the valves.
Are they boat anchors?
I really don't want to drive them to the machine shop if they are. It is about an hour drive one way.