jacobbingham
Registered User
96 F250 7.3 powerstroke 5 speed with 206*** miles i pulled the filter out and cleaned the fpr screen and also before i tried to pull the fpr screen out by taking out the 2 bolts on the side and pulling it apart but i couldnt so i put that back together and cleaned it through the filter housing it had alot of crud but filled the housing put the filter in and then i went to start after and it started but ran at 200-400 rpms and was shaking really bad turned off and then started again and did the same but i hit the gas and it reved and idled. Went to the store shut it off came back out and i had to hold my foot down while cranking just till it caught then it idled. its where i have to do that everytime now whats the problem???? Truck has intake exhaust and fpr shim