aofarrell2
Turbo Desirous
Okay, so I've got a 1989 Ford F350, got a cluster out of a 1988 V8 gasoline. There are 4 wires going to the tach, on the clusters gray connector, these are the numbers:
Pin 4 - Ground (BLACK)
Pin 6 - Tach signal from coil (DARK GREEN/YELLOW?
Pin 7 - Unknown function (BLACK/YELLOW)
Pin 13 - Unknown function (RED/YELLOW)
So my question is, did I get the first two right, and what are the second two for?
Thanks!
--beginningjockey
Pin 4 - Ground (BLACK)
Pin 6 - Tach signal from coil (DARK GREEN/YELLOW?
Pin 7 - Unknown function (BLACK/YELLOW)
Pin 13 - Unknown function (RED/YELLOW)
So my question is, did I get the first two right, and what are the second two for?
Thanks!
--beginningjockey