Search results
-
B
Another Problem
It was good to meet ya Scott and glad we got ya back on the road and fixed up. I think you will be good to go now and shouldnt have any more problems with it. If you do I might have to screen those calls...:angel:- Bean
- Post #32
- Forum: 7.3L Powerstroke Diesels
-
B
Another Problem
Scotts on his way, it was head gaskets issues. I will let him fill you guys in on the rest. Pulled it in on Monday morning and out on Tuesday evening.- Bean
- Post #26
- Forum: 7.3L Powerstroke Diesels
-
B
Pulling the Motor
Its just a case of a weak PMR motor, I have seen them go before and there will be more in the future. You see people say they are safe to 400hp and soem guys running 450hp on them but what one set can do and another is a different story. They are very inconsistent in thier strength and one may...- Bean
- Post #80
- Forum: 7.3L Powerstroke Diesels
-
B
Pulling the Motor
Head will be fine, lifter parts are from the rod slingin around and busting out the block around the lifters. I bet there isnt a mark on the head. The bent pr is from valave contact after the rod broke but valve should be fine, thats why the pr bent.- Bean
- Post #47
- Forum: 7.3L Powerstroke Diesels
-
B
Pulling the Motor
Theres too many dang forums now! Now since I have a cummins in the truck I not only have PSD forums I have the Dodge/Cummins forums I go to as well. Hard to spread the love. ;Sweet- Bean
- Post #20
- Forum: 7.3L Powerstroke Diesels
-
B
Pulling the Motor
I could have you a short block built and ready by next weekend probly. It would all depend on how smooth things go in getting parts and if the machine shop can get it done that quick.- Bean
- Post #19
- Forum: 7.3L Powerstroke Diesels
-
B
Pulling the Motor
You can leave all the front stuff but it has to come off at one point or another. You will have to pull the charger but you dont have to pull the pedistal or up pipes. I have plenty of forged rods, cams, and blocks. Nothing built just core stuff that needs built. If you need something along...- Bean
- Post #16
- Forum: 7.3L Powerstroke Diesels
-
B
Pulling the Motor
Pull the front header panel, cross brace, rad., IC, bumper and you will have a nice open front end to pull it right out. pull your fuel lines loose, heater hoses, p/s hoses, take AC pump off and with a fender cover on the pass side fender fold over the condenser over the fender and take the pump...- Bean
- Post #2
- Forum: 7.3L Powerstroke Diesels
-
B
MAJOR Engine Failure!!!
Scott, I dont make it over here much at all anymore but just came across this. Sorry about your loss, that engine definetly should not have done that with your mods. Let me know if I can help with something, I have cores and stuff layin around but they all need built in some way or another. You...- Bean
- Post #52
- Forum: 7.3L Powerstroke Diesels
-
B
Need some IDI help
Ok, got her all to work good and the timming is real close, close enough that I know thats not my problem now. I did not test the injectors before I put them in, got them from one of my suppliers that do pump rebuilds and other fuel stuff so I assumed they would be drop in ready. One thing I...- Bean
- Post #11
- Forum: 6.9L IH & 7.3L IDI Diesels
-
B
Need some IDI help
The injectors are brand new stanadyne flavor. Still dont know why the pulse is jumping all over. You can see it in the little led light on the pulse adapter too, you can see the intermitent pause on a regular rythem. I should have my new didgital timming light on Wednesday and see what it does...- Bean
- Post #7
- Forum: 6.9L IH & 7.3L IDI Diesels
-
B
Need some IDI help
Yes it was all new injectors and reman pump. I did pull the cover but marked the position of the dowel pin on the cover before taking it off, being on a van the easiest thing to do was pull the cover with the pump and do everything on the bench then reinstall with the cover attached to the pump...- Bean
- Post #4
- Forum: 6.9L IH & 7.3L IDI Diesels
-
B
Need some IDI help
Got a 7.3 van here that we put in a Hmax turbo, injectors and IP all at the same time. I have it timed the best I can to 8.5 deg BTDC. Problem is it has a lope to it and smoke bad when cold and overall just isnt right. Its real hard to time cause any timming light I use it jumps all over and...- Bean
- Thread
- Replies: 11
- Forum: 6.9L IH & 7.3L IDI Diesels
-
B
Mac Pulse adapter
How is the best way to go about using one of these to time a 7.3? I just bought one brand new and not sure how to use it with there only being a 0 deg mark on the tab, how do I get 8.5 BTDC?- Bean
- Thread
- Replies: 2
- Forum: 6.9L IH & 7.3L IDI Diesels
-
B
FS: Mac tools ET18DPM mech pulse adapter
How do you use this thing on a 7.3? I just bought one brand new but not sure how to use it since there is only TDC on the pointer, how do you get it set at 8.5 BTDC?- Bean
- Post #2
- Forum: Marketplace
-
B
bdp open house party and dyno day- March 25th
Sorry, here is the address for the shop, beans diesel perfromance 1664 Murfreesboro Rd Woodbury, TN 37190- Bean
- Post #3
- Forum: Events and Get togethers
-
B
bdp open house party and dyno day- March 25th
We are gonna get Diesel Performance Motorsports up here with thier dyno (thanx David) and have a dyno with a party, when I mean party I mean all you can eat and drink party. ;Sweet So make plans now, all are welcome to come just drive a diesel!- Bean
- Thread
- Replies: 4
- Forum: Events and Get togethers
-
B
Stroked Lightning on TV
Just hope ya plugged the bdp sticks in your interveiw. ;)- Bean
- Post #4
- Forum: Events and Get togethers
-
B
Best place to get new injectors
Yes you are right about bean and cass, my fault, i get them confused. Sorry guys! You didnt just say that- Bean
- Post #27
- Forum: 7.3L Powerstroke Diesels
-
B
Idle problem
Have someone with a 01 that the idle will surge up and down and sometimes even try and pull while stopped at a stop light cause it surges so bad. Is this a common thing? Anyone know where to start with that?- Bean
- Thread
- Replies: 0
- Forum: 6.6L Duramax Diesel
-
B
L10 turn up
This one is a single axel L-series, dont know pump or year. He siad teh hp rating but I dont remeber what it was, he did say his old mack was teh same hp rating but it would out pull that L-10 by leaps and bounds, probably a larger displacement and bigger tq # is my guess.- Bean
- Post #4
- Forum: Performance & Upgrades
-
B
L10 turn up
So whats the skinny on cranikin up a L10? Got a freind thats got one and its a bit doggy pullin his backhoe, want to see what I can do to get some more fuel runnin threw it. So any ideas.- Bean
- Thread
- Replies: 4
- Forum: Performance & Upgrades
-
B
95 Dt466
I just slid the plate and he he thrilled, picked up almost 10mph on his nemises hill. I only slid the plate until I get him a couple gauges in it then I will mess with it some more.- Bean
- Post #9
- Forum: Performance & Upgrades
