Search results

  1. cbert

    Hx35 idi

    Hey guys, I'm in the middle of putting a water cooled HX35 on my truck that I got out of a dodge. I am going to run in on the 94 factory turbo kit using the same up pipe and oil drain. I am also adding a intercooler from a 03 power stroke. The only problem is that the compressor side of the...
  2. cbert

    oil leak

    after i took my motor out and relplaced all of my oil seals and oil pan i had a large oil leak coming from my factory turbo kit because i did not have the right grommet for the turbo drain. so i bought a turbo reseal kit and now it leaks no oil. but there is still a huge leak that looks like its...
  3. cbert

    0 oil pressure

    hey guys, so when i had my motor out i decided to do my oil cooler gaskets and o rings and while putting the cooler back together i cracked the cast aluminum cap that would be on the front side of the motor. i did run it and it pissed coolant out but everything else was good. so i went out and...
  4. cbert

    1993 f150

    hey guys, my girlfriend has recently picked up a truck that i have found out that i need to own. it is a 1993 f150 regular cab short bed with a 351(not a lightning) she regularly refused to sell it to me and ive been looking and i cant find another one, only overly priced lightnings. are these...
  5. cbert

    twin turbo

    who thinks id be crazy for running a twin turbo set up on my idi. im in the process of getting a factory turbo and i currently have a ATS 088. then i thought those two turbos would be good for compound boost. i understand it is a lot of fabricating, that is not a problem. its just a thought. if...
  6. cbert

    improved 6.9

    i dont have any questions this time, i just wanted to share what ive been doing to my 6.9. i took the motor out and tore it apart replacing almost every seal on it because it seemed to leak oil from everywhere possible. i also bought myself some arp studs and a old ats non wastegated system for...
  7. cbert

    power?

    im in the process of resealing alot of things on my motor right now and doing head gaskets and arps. i have a ats 088 turbo i am putting on. and buying stage one injectors with a RD2-90 pump. i have no idea what kind of power increase i will have. does anyone know what my tq and hp #s should be...
  8. cbert

    parts

    i looked for a forum just for parts for sale but i couldnt find one. so i was wondering if some one has a serpentine belt set up 093 turbo kit thank you
  9. cbert

    clutch

    i just pulled my motor out yesterday and found out i need a clutch and possibly a flywheel. all i can find online is clutches for a 5spd transmission and i have a t19. will these clutch kits work with my transmission? and the flywheel has a lot of cracks from heat. can it be resurfaced? id buy a...
  10. cbert

    ats 085

    i have a ats 085 kit that is going to be going on my truck and i was wondering what the highest boost #'s anybody has seen with these kits non intercooled. also i don't have the o ring for the intake hat. is there any other ways to seal it up? thank you.
  11. cbert

    arp?

    i am currently taking my motor out to replace my oil pan in my schools auto shop and i was wondering if its a good idea to put arps on without changing the gasket. i would do one at a time so the gasket cant move at all. but i dont know anything about the motor from the previous owner such as...
  12. cbert

    Help

    in my 1987 f250 my plug is stuck in my oil pan... the plug is just spinning and will not come out. i thought the welded insert broke loose so i cut the head of the bolt of just to find out it was not the insert.. im not too sure on what to do and pulling the motor to put a new pan on is my last...
  13. cbert

    6.9 turbo

    i have a old 1987 with a 6.9 and i can pick up an ats 088 turbo kit tomorrow but im worried about it ending my motor faster. as long as im not going over 10psi should i be worried? i have no idea how many miles are on the truck and it has seen better days but my main concern is lifting a head...
  14. cbert

    engine swap

    in the past i have been thinking about completely rebuilding my 1987 6.9 but recently i have found a 94 factory turbo idi should i just swap that in instead? things to look for on those motors?
  15. cbert

    rebuild kit

    hey, i am planning on rebuilding my 1987 f250 with a 6.9 in it and i am not sure how to go with buying the parts. i'm currently looking at the whole stock motorcraft kit and putting arp's on it. i would like to get a tiny bit of more power but if its gonna cost a lot more i'm fine with running a...
  16. cbert

    pump timing

    my 1987 6.9 idi has had a problem with the timing since i bought it because it is clearly off but i need to get the injection pump properly timed and i do not want to take may water pump off, whats a easier way to time the pump than taking the water pump off
  17. cbert

    1987 6.9 gp relay problems

    Yesterday i was doing my injector o rings and return lines and stuff and my wrench i was using to get my injectors out hit my glow plug relay. then shortly after that the relay by my battery had a wire on it that started smoking and melted. so i tried putting it back together and when i turned...

Latest posts

Forum statistics

Threads
91,306
Posts
1,130,044
Members
24,117
Latest member
olsen726

Members online

Total: 705 (members: 6, guests: 699)

Share this page

Top