Search results

  1. Rocket Ryantist

    Door Handle Problems

    So, after a year and a half of my passenger door being finicky on the inside handle to get open, the cable has finally decided to break all the way through. I got the door card off and peeled the plastic liner away to see what I'm dealing with. Is this as fun as it looks to do? I can barely...
  2. Rocket Ryantist

    Dana 50 Independent Pieces

    Howdy folks, have a 93 f-250 with the Dana 50 auto lockers I took apart the other day and noticed one side is missing half of the cam for the locking mechanism. Parts counter workers have been no help and exhaustive googling has been no help. I'm wondering if there are any resources to...
  3. Rocket Ryantist

    Stuck on hub removal...

    Well folks, turns out the tool I needed was a 2 3/4in rounded hex socket. Took it right out and managed to get all my ball joints replaced and back together. Thank you everyone for the help!
  4. Rocket Ryantist

    Stuck on hub removal...

    Thanks! I guess tomorrow I'll go out and see if I can see the splined spacer and try to get it out. I appreciate it everyone. I'll update tomorrow.
  5. Rocket Ryantist

    Stuck on hub removal...

    I found someone needing this tool to do it which is where my confusion came from. http://m.oreillyauto.com/h5/r/www.or...1695&ppt=C0195 Could this be what I need? I haven't tried the lock washer too hard yet. I have pryed and pulled on it but nothing too hard. Didn't budge though.
  6. Rocket Ryantist

    Stuck on hub removal...

    Sure thing! Here ya go.
  7. Rocket Ryantist

    Stuck on hub removal...

    Well it does but I'm still stuck here. I'm to the point now seemingly where I should have 4 slots on my spindle nut where I need the spindle socket. But I only have 1 slot, like in my first picture. This is where my confusion is coming from because I haven't seen anything like it. Am I not far...
  8. Rocket Ryantist

    Stuck on hub removal...

    So is this (or similar) what I need for getting that lock nut thing out? http://m.oreillyauto.com/h5/r/www.oreillyauto.com/site/c/detail/PFM0/W83246/N1695.oap?ck=Search_N1695_-1_-1&pt=N1695&ppt=C0195 The last thing I removed is the C clip. So how do I go about getting the washer with the...
  9. Rocket Ryantist

    Stuck on hub removal...

    Okay so this is what I've got out so far. So it seems I need the retaining nuts out next? And the retaining washer(with the holes in it?) How do I go about removing those cause that's what I'm stuck on. Not sure how I got the spanner nut out without the tool, it just kinda pulled out. Sorry if...
  10. Rocket Ryantist

    Stuck on hub removal...

    So what you're saying is I should be able to pull the spindle and everything off now as it is?
  11. Rocket Ryantist

    Stuck on hub removal...

    Much appreciated! Am I to the point where I need the part nthough? I don't see how the socket fits in there though to do anything.
  12. Rocket Ryantist

    Stuck on hub removal...

    So, I'm wrenching on a 1993 F-250 4x4 with auto lockers, trying to replace ball joints. So I'm gotten all of the clips and lock rings out here , and after doing some research I've found I needed a specific socket for this. However i fail to see how this socket removes what I need, but maybe I'm...
  13. Rocket Ryantist

    Any shop manuals better than another?

    Hello folks, my name is Ryan and I finally bit the bullet and bought my first diesel yesterday, a 1993 F-250 7.3l turbo 4x4 with a 5-speed transmission. I've been lurking on here for the past few days trying to learn as much as I can in anticipation. Anyways, I used for the forum search and...

Latest posts

Forum statistics

Threads
91,345
Posts
1,130,760
Members
24,143
Latest member
Cv axle

Members online

No members online now.
Total: 186 (members: 1, guests: 185)

Share this page

Top