My rear passenger axle keeps coming loose. The bolts that go into the hub keep coming loose and when it gets loose the bolts break. What is causing this? Hub is tight, and bearings are good. Changed the hub twice thinking it was the hub. Different tires and different rims and still have this...
Can anyone tell me what t-case I have? I'm getting mixed answers.
92' f250 had a 7.3 Idi
Still have a zf5 with what ever t-case it is.
Tring to find out so I can get a driveline e-brake
How hard is this swap? Do drive shafts have to be shortened/lengthened or u-joints changed?
Have a zf5 4x4 that I cracked in half and found a 4x4 zf6 for pretty cheap
Does it bolt right up into the zf5's place?
12v is in and hooked up my battery but no power at all!!!
I'm gunna check voltage on my batteries when I get a meter in a Lil bit but what could I have cut or undone for this??
Could my cluster being out cause this??
My vacuum pump line goes to a plastic piece full of other lines
What are they?
Booster, cruise
But what is the one that goes to a can looking thing under my driver battery and what if one of the ports is open?
I think this is my brake problem
Idk if I might be looking up the wrong things but can anyone tell me which big rear fuel tank I can use on my 92 f250?
Lmc only offers up to 89 and I might get it and make it fit but I know ppl on here have done this mod.
Lookin to get 30+ gal and the one from lmc is 38. Also would a bronco...
I took out my front tank since it was giving me problems. Ima do away with my valve and just run straight from my tank. What color wires on the bottom of my valve are the ones to tell my fuel level so I can hook up my after market full level gage?
Does anyone have a 5" srk kit from sky man.??
I'm looking for a measurement from bottom of frame to center of leaf spring hole
Also when I do my body lift I'm going to change my bushings. How much lift will I gain out of this? 1"?? And will it help my ride??
Does anyone have a 5" srk kit from sky man.??
I'm looking for a measurement from bottom of frame to center of leaf spring hole
Also when I do my body lift I'm going to change my bushings. How much lift will I gain out of this? 1"?? And will it help my ride??
I have tried a few times and can not get my answer threw search but I'm positive this has been discussed before.
Can someone tell me why all the body lift kits for a 92 f250 say "not compatible with diesel"???
Is it something I can make work?
This would really help with some clearance in my...
I have a 92 ex cab long box f250 4x4
Does anyone know the stock ride height of this truck and where to measure?
There's been some stipulation on my lift
I have a 92 idi (about 350k) that runs fine with no problems and still pulls and strong!!
Looking to get rid of it all
Located in Lafayette la
Can send vid of it running
Make am offer
Plz don't try to jack the thread or lowball
I don't remember on which forum inmet him but he has a blue 4 door f350 4x4 with a d60 and no lift running 40's or 44's with just alot of fender trim
Any help?
Th guys with big tires
What kind of bs are u running?
I'm lookin at some 20x10 with 0 bs to run either 43's or 46's depending on what I can fit with my project
Ok so I asked this a while back and couldn't get a direct answer and I'd like one cuz I need to know how to go about this project before I start it
I have a d60 up front with 4" springs giving me 6" of lift up front
Or a d60 w/ 6" springs (which ever gives me 6" of lift total) and I have 6"...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.