I broke the wastegate actuator on my 7.3 idi factory turbo while trying to adjust the boost. Where can I buy a replacement actuator? If you guys have a part number please post it up.
Thanks!
It was my multimeter. After using the multimeter that I borrowed from work, the TPS is now reading 1.1 at idle and 4.4 and full throttle. Since I only use my truck for towing, I might adjust it to 1.2.
Gary, the picture I used was one that I found on Google images. My TPS is grey.
That's exactly how I installed it. One of the allen screws is going through the hole in the throttle shaft, and the other is just tight on the shaft body. While looking at the pump, one screw faces up towards the sky, and the other is facing forward towards the front of the truck. I did have to...
I just fixed the attachments. Was I not suppose to remove the PIN that the arrow is pointing too? I couldn't get the round lever with the allen screws to go on without removing the PIN.
Here are some pictures that show the pin that I was referring too. I had to remove it to install the round lever with the allen screws. Did I do that right?
No matter what I do, I can't seem to adjust the tps so that it has an idle voltage of anything below 2. It either has no idle voltage or 2 if I turn the tps completely towards the front of the truck. Maybe I installed the tps and it's bracket wrong when I switched it from the old pump to the new...
Hey Gary, I decided to knock it out yesterday with the help of my brother. I torqued down the injectors to 33lbs (per Mel's article). I was wondering about the TPS since I have an automatic. I tried bolting it on in the exact same position it was on originally. What's the process to correctly...
I just got done installing the famous Moose Pump (Junior) and a new set of BB injectors. I have a couple of questions regarding my install, can you guys take a look at the attached diagram and approve or disapprove on how I connected my return line kit? Since I have a 7.3 IDI Factory Turbo, it...
The parts are in! I got the downpipe installed last night. Surprisingly, it was a pretty easy install, only took me about an hour. Going to try and get the moose pump and injectors installed by this weekend. I'll keep you guys updated.
Can you guys confirm that this is the correct place to hookup the turbo boost gauge line? Is that hole threaded for 1/8 NPT? This is for a 94 7.3 IDI Factory Turbo.
Thanks!
I definitely plan on doing the work myself... and if you're willing to help, even better! I'm near the 10 and the 710. I was also planning on getting typ4's "torque" cam and ARP studs but I figured that would be way too much work and probably something I'm not comfortable doing myself. I called...
Okay... the mods are on their way. I hope this investment pays off!
I just placed an order for the famous Moose Pump (Junior), BB injectors, Banks 3" DP, and a set of GlowShift gauges (EGT, Boost, Trans Temp). I'm crossing my fingers that this will give me the power that I'm looking for. :)
a) what rear axle ratio is in your truck currently? You know where to place your bets, it has a 4.10 rear end.
b) when was the last time you had it timed? I've never had it timed, not sure if the last owner did. I'll search around to see if someone in my area has the proper tools to time it...
This is really helpful, thank you! If you live near by, I'll take you up on your offer to meet up so that you can school me on these IDIs. How much money am I looking at for a good set of injectors and rebuilt pump? It sounds like I should either get them from "typ4" or "Agnem". As for the down...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.