Search results

  1. turbo69

    Turbo Installation/Brain Storming/Pic post

    build a 't' bracket and attach to intake bolt on passenger side (bracket in blue) use the ip cover inspection plate to build a rdt adapter build a cube with walls in it to help catch some excess oil from the rdt build a cdr block off and drill and tap to feed back into top...
  2. turbo69

    Chug Chug CHUG

    That is definately not a chug like we had. if you can imagine what an 18 wheeler sounds like letting off the air brakes into a pipe, but once every rev...thats what ours did.
  3. turbo69

    Chug Chug CHUG

    my bad...thinkin small blk not diesel... lets go with #3 ;)
  4. turbo69

    Chug Chug CHUG

    Well, pulled the pass side valve cover and fired her up. Sure enough, we got exhaust coming out of the #2 exh valve guide. I can reach down and wiggle the valve and spring assy. Found a 7.3 complete and running for 200 bucks. Gonna pull the pass side head and replace this next weekend, cause...
  5. turbo69

    Chug Chug CHUG

    Hey ladies and gents- Been a while. Thought I'd pop in and say hey and see if you all can help me solve a little problem here. My brother has a 90 model f350 dually with the 7.3 and E40D. The problem is a new noise that started about a month ago or so. When the truck is idling whether...
  6. turbo69

    89 F-250

    The truck actually belongs to my brother. He and his wife have a little sliver of property east of Dallas. Farm tags are quite a bit cheaper that reg tags, at least here in TX. Besides, insurance is cheaper too.
  7. turbo69

    89 F-250

    89 3/4 ton reg cab long bed truck w/7.3 NA and ZF 5 spd, gooseneck hookups, no tailgate. $2500 obo for pickup in Garland TX. Can deliver a short distance (100 miles or so for a small fee) with cleared cashiers check. Contact me at b_blankenshipjr at msn.com, or PM me here.
  8. turbo69

    Best style N/A intake...

    Ghost Tube as requested... ...It's actually an open element filter system by air raid that fits 2001 dodge p/u with 318.
  9. turbo69

    IP replacement tips

    We ordered a rebuilt IP from Pensacola Diesel today. Only $825.00 w/ 1 yr warranty. It should be here middle of next week. We'll see how she holds up. Anybody got any tips or tricks for replacing the IP? Or maybe even a service procedure? I figure it should be pretty straight forward...
  10. turbo69

    IP needed!!

    I need an injection pump. See http://www.oilburners.net/forums/showthread.php?p=217401#post217401
  11. turbo69

    IP for Dodge needed...

    I need a new or used complete injection pump. Anybody got one laying around they want to get rid of that will pump on a 96 2500 CTD with a 5 spd? Stock is fine...built is better. Email me at [email protected].
  12. turbo69

    Looking to sell 96 12v cummins

    Please e-mail me with a price at [email protected]
  13. turbo69

    96 CTD Injector problem

    I need a used IP, anybody got one laying around they want to get rid of?
  14. turbo69

    96 CTD Injector problem

    But, it does sound like the pump's gone, right?
  15. turbo69

    96 CTD Injector problem

    I dunno, you tell me. Remember, be gentle, I'm a former IH'er that barely knows his way to the light switch in an old goat. I think we have found that the IP has $h!t the bed, and it's entirely possible that the f'n around that I did may have contributed. I think we did get the valve body...
  16. turbo69

    96 CTD Injector problem

    Think we may have found the problem, but first a question. Is the thing on top of the IP (6 of them) that feed each individual injector line call a delivery valve? The #5 delivery valve is broken at the o-ring. It came out in two pieces. Gonna attempt to fix by welding and machining...
  17. turbo69

    96 CTD Injector problem

    Thanks again Travis. That may be the answer I was looking for. I'll check that next.
  18. turbo69

    96 CTD Injector problem

    Well, after pulling the valve covers and seeing that the vale train is good, I talked to Bryant here at my local DIS. I still need to do the compression test on her, but I think that compression will prove good. DIS seems to think that the IP has taken a turn for the worse. He told me to pull...
  19. turbo69

    96 CTD Injector problem

    It's kinda funny, #5 looks like it's getting more, no matter which injector is in the hole. I'll assume though, it's okay.
  20. turbo69

    96 CTD Injector problem

    Thanks Travis- I'll give it a look tonight or maybe tomorrow and see what I can find. Other that putting the IP on a test stand, Is there any way to check to see that the pressures at each injector are correct? Or should I stick with the theory that if I get fuel, it's enough fuel. By...
  21. turbo69

    96 CTD Injector problem

    Well, I got good news and bad news... Good news, It's not the Injector. I got adventurous and swapped #4 and #5. Bad news- Problem stayed at #5. Dead hole. I don't think it's fuel related because if I crack that line, I get what I think is plenty of fuel at the line nut. Come to...
  22. turbo69

    Thinking of swapping my c-6 for a e4od

    Be sure you get the 4wd E4od. The 2wd version will not accept the xfer case. Totally differet output shafts and tailpiece. You could do a diverced case like an NP205 or something
  23. turbo69

    96 CTD Injector problem

    I got the injector out of the hole, and clened her up, but to no avail. I'm going to try and find a place local to Dallas that can do a pop off test on this thing to see if it's good or not. I guess I'll end up putting a new one in it.
  24. turbo69

    The rumours are true

    :wtf: Ya leave for awhile, come back home, and Daddy done went and got himself swonked!!! :rotflmao The tech bug infected the one man we all "knew" would never succomb. Times are changin' boys, times are changin'. All kiddin' aside Mel, good lookin' Scurvy ya got there. Them PSD's...
  25. turbo69

    96 CTD Injector problem

    I tried basically that same thing, but with the injector line nut threaded on, prying up with a pry bar(about 3' long) against the exhaust manifold but I did not want to put too much pressure against it. Can I really lean on that thing? I wonder if I ought to put a little penetrating oil in...

Latest posts

Forum statistics

Threads
91,304
Posts
1,129,966
Members
24,110
Latest member
Lance

Members online

Total: 684 (members: 8, guests: 676)

Share this page

Top