Recent content by sd2649

  1. S

    Wanted! Engine Core

    WANTED!!!!! 7.3 idi engine - no injectors, Glowplugs, valve covers, IP or any other accessories needed, just the block, heads intake and exhaust manifolds. It needs to be in good shape with good compression around. Asking too much?? I thought I'd try!
  2. S

    Dyeing Cylinder

    Anyone want to buy this thing?? Just kidding. Any way to bypass this cylinder? I am thinking about pulling the fuel line from that cylinder, put it on a spare injectore I have and have the fuel hised back to the fuel tank. No explosion = no risk of dropping valve and no burnt oil...
  3. S

    Dyeing Cylinder

    Found my problem! http://viewmorepics.myspace.com/index.cfm?fuseaction=viewImage&friendID=114972840&albumID=2182218&imageID=32224204 http://viewmorepics.myspace.com/index.cfm?fuseaction=viewImage&friendID=114972840&albumID=2182218&imageID=32224202 I completed the compression test and...
  4. S

    Dyeing Cylinder

    I really appreciate the offer though!!!
  5. S

    Dyeing Cylinder

    I'm in brownwood, but will be moving to Stephenville in a few months. Quite a little drive from Beaumont.
  6. S

    86 F-350 Dually CC 2WD Parting out?

    Seriously though, heads??
  7. S

    86 F-350 Dually CC 2WD Parting out?

    What do you mean?
  8. S

    86 F-350 Dually CC 2WD Parting out?

    Either way you cut it, you will be discarding the engin, right?? Well how much for the heads and possibly a piston??? I need heads and a piston, you need a new lower end and IP, put it together and we have at least one good engine! If you will not part the engine, maybe someone could go...
  9. S

    Dyeing Cylinder

    Oh, one more thing, where's the best place to get a new head gasket, cylinder and rings?? Online of course.
  10. S

    Dyeing Cylinder

    Oh no, I think I'm gonna cry!! I will still be doing the compression test and possible soak. I am just hoping I guess. I'll let yall know wheni've given up, about this time tommorrow.
  11. S

    Dyeing Cylinder

    I didn't have time for the compression test yesterday, I will be getting my brothers help at it tomorrow. I did howeve mess with the timing. I advanced it and the blowby was horrendous! Huge single puffs. I am thinking it could be a hole in a cylinder now. I don't see how rings could let...
  12. S

    Dyeing Cylinder

    I now have my compression tester and will be attempting to work on the truck tonight. I am hoping to make some good/bad discoveries. Thanks again for all the help. By the way I have put another 2000 miles on it since last time and burnt about 12 gallons of 20w50 in her! Shouldn't this thing...
  13. S

    Dyeing Cylinder

    no there is not. there is a nice puff coming out of the exhaust valve though. I think the fact that the valve covers are uniform is the fact that it is bathed in a mist of oil coming through the push rod holes???????????? but, no no crud, doesn't make sense, but the exhaust valve is...
  14. S

    Dyeing Cylinder

    I still haven't received my compression tester, but I took off the valve cover today and here's what I've found. If this is right "Cylinder numbers are assigned 1,3,5,7 on the left(passenger) bank from front of truck to back, and 2,4,6,8 on the driver's side, front to back. Firing order is...
  15. S

    Dyeing Cylinder

    I would be running it as is if it weren't for the horrible oil consumption. I was asking what to look for with the valve covers off, not the heads. I ordered a compression test kit yesterday and will post my results whenever it comes in. Until then, I huesax I'm stick burning oil like...
See more

Latest posts

Forum statistics

Threads
91,310
Posts
1,130,149
Members
24,120
Latest member
SixFourShanks08

Members online

Total: 555 (members: 8, guests: 547)

Share this page

Top