Recent content by longhorn795

  1. L

    looking for part #'s for moog ball joints on my 1996 dana 50

    Does anybody know what the part number's are for upper and lower balljoint's from moog is for my dana 50 ttb on my 96, all part's store's are wanting arm and leg was just gonna order off amazon but didnt want to get the wrong one's. And are the one I need splined or just flat? I know its 4600...
  2. L

    truck died while driving

    Last night I found out that the nut on my ipr had fell off the back and where you plug the pigtail in was just flopping around, so I put a new nut and put it all back together and now stil no start. The gauges aren't working, windows, wiper's, radio, aren't working. wts isn't coming on either...
  3. L

    truck died while driving

    Im talking about my powerstroke, not my idi
  4. L

    truck died while driving

    Last night was driving down the interstate and my truck just completely shut off and wouldn't start back, put a new cps on it and still no start. any ideas???? thanks:dunno
  5. L

    need help on rear axle pinion bearing truck is down

    everything on the inside look's good bearing look's good race everything but stil cant figure it out
  6. L

    need help on rear axle pinion bearing truck is down

    I was thinking my pinion bearing was shot cause a couple day's ago I had found my pinion nut came loose on me some how, so I started driving it again and it started to make a popping noise so I figured it messed up my bearing when it came loose. I took everything out of the rear end and the...
  7. L

    advice on taking 94 factory turbo off

    to rebuild it
  8. L

    advice on taking 94 factory turbo off

    alright guy's im bout to attempt to take the factory turbo off for a guy on his 94, does anybody have any tip's or advice before I try taking it off. Ive taken off a powerstrokes before but is it harder then it? thanks
  9. L

    not staying charged

    okay so I just bought a 1998 12 valve and it is not staying charged, it was a 24 valve and they done a swap and put a 12 valve in it, the batteries will charge up but after driving for 20 minutes the volt gauge will go to 0 and nothing electrical work's, put a new alternator on it and still the...
  10. L

    what could i get out of it

    Thinking about putting my truck on ebay, was wandering if anybody could guess what i could get out of it? 220,000 miles 1989 ford f250 5 speed 4x4 runs great
  11. L

    jerking in front end

    yeah my 89 has a 44 cause it is the smaller hub's cause when i put bearing's in it was the small one's, but the 44 and the 50 have same axles right if i switched them out? thanks
  12. L

    jerking in front end

    oh I thought there was 2 diffrent sizes sorry
  13. L

    jerking in front end

    same tire size all the way around, it's jerking going straight forward so it cant be the right ratio in the front. I was also wandering I have a 96 f250 and im going to be putting a locker in the front end of it, i thought about just putting it's front end in the 89 ford but im pretty sure it...
  14. L

    jerking in front end

    we didnt look at the pinion gear, it probably is a 3:73 , only looked at the ring gear teeth i wa sin a hurry to get back together. So i guess i can just put my old pinion back in right and it would work?
  15. L

    jerking in front end

    1989 ford and i just got done putting a new front end on cause some of my ring gear teeth were broke and my 4x4 wasnt working. So i switched it all out for another f250 front end that i baught thinking it has to be a 4:10s, so i looked at the ring gear on it and it has the same exact amount of...
See more

Latest posts

Forum statistics

Threads
91,287
Posts
1,129,812
Members
24,106
Latest member
lewisstevey7

Members online

Total: 799 (members: 5, guests: 794)

Share this page

Top