Recent content by Chevyboy_0

  1. Chevyboy_0

    '87 F250, Reg Cab 2wd for sale

    I finally made up my mind, the truck is for sale. Its an 87 f-250, Reg Cab 2wd, with the 6.9/T-19. The motor has new head gaskets, New Delphi "BB" codes, new water pump, new belts, new radiator cap, and a new Carter Electric Fuel pump(p/n 4070) The interior is pretty sweet if I do say so myself...
  2. Chevyboy_0

    From a gas station in Reno

    /\ That happened to my Chevelle a couple times before, I had to stomp the brakes and stop because some moron decided the Green light meant stop. and the brakes didnt feel right, upon inspection I found that the slider bolts were wore out along with the bushings. I know exactly what O'Reilys...
  3. Chevyboy_0

    Thinking about selling

    Thats why i want one. I will settle for an Auto if I have to, but I if I can get $2k from my truck Ill go buy it this weekend.
  4. Chevyboy_0

    Thinking about selling

    Ill try it and see what happens. Honestly I think I just wanna sell it. I found a nice 90 Bronco, with the 5.0 and a 5 speed ;)and leather, A/C, and power everything. The guy wants $1900 for it with 120k miles
  5. Chevyboy_0

    Thinking about selling

    Should I just try and run a hot wire from B+ to the FSS and see what happens? Dont get my wrong I love my truck, but right now its not being economical. I have put a ton of money in to it trying to get it working right but I dont want to work on it anymore. I have to work on the Chevelle...
  6. Chevyboy_0

    Thinking about selling

    I hate to say it but I'm thinking about selling my truck. I'm just getting extremely frustrated with all the work and time I've put in to it and it still not running. I'm really close to getting it there but now when I bleed the system I don't get any fuel past the IP after installing my new...
  7. Chevyboy_0

    custom air intake size

    I machined mine out of 6061 AL.I started out with a piece of 5" tubing with 1/4" walls, The base was turned out to 5.250" and I welded a cap on the top and turned it to clean it up all nice and pretty like :sly Then I milled a hole in the side and welded a piece of 4" tubing in the side. I made...
  8. Chevyboy_0

    Motivation dwindling on would be project!!!

    I gotta agree with Towcat on this one. But then again when I did my '70 Chevelle I did 95% of the body work and bought materials for the paint and that helped on the cost. OTOH a CC LB is alot more real estate to cover then a 1970 Chevelle.
  9. Chevyboy_0

    starts then dies

    After I re did the head gaskets on Miss Becky she would do this too, she did this for a few days until it all of a sudden just stopped doing it. Im sure after opening the fuel system you just got some air in there. But then again it could be something different as well
  10. Chevyboy_0

    Left Coast GTG April 9th&10th 2011

    I think I might know a certain feller who may be able to work something out....
  11. Chevyboy_0

    Left Coast GTG April 9th&10th 2011

    I'm in, Ill bring Burgers and buns? As well as some drinks of some sorts. Put me down for 2 Hopefully if everything goes as planned I should have Miss Becky running, If not I just may have to bring the Chevelle up :sly
  12. Chevyboy_0

    Who needs a dually bed?

    I need it but shipping would kill me to CA. :(
  13. Chevyboy_0

    Thankful

    This same exact thing happened to me in my Chevelle. Luckily I was in the parking lot at the bank. but had just got off the freeway about 5 minutes earlier.
  14. Chevyboy_0

    IDI brings home a new international

    Congrats on getting the new rig running :D
  15. Chevyboy_0

    P u M p P 0 r N

    Thanks for the Picture, Ive always wanted to see the insides of an IP
See more

Latest posts

Forum statistics

Threads
91,306
Posts
1,130,050
Members
24,117
Latest member
olsen726

Staff online

Members online

Total: 753 (members: 14, guests: 739)

Share this page

Top