Recent content by Biggreen94

  1. Biggreen94

    Boost Guage?

    Thanks ;Sweet
  2. Biggreen94

    Boost Guage?

    Where is the best place to hook up the boost guage on a 94 IDI turbo? :confused:
  3. Biggreen94

    New springs or lift kit?

    Its time for some suspension work! The front springs are about 1/4 an inch from the bump stops. Not only that, but the shocks are shot all the way around. I've done some checking, and new front springs are going to run about $400 to $500 installed. I can get a 4 inch lift with shocks for $549...
  4. Biggreen94

    Trans Problems Again!

    I replaced it and truck works great! ;Sweet Thanks everyone. :D
  5. Biggreen94

    Trans Problems Again!

    $45 is alot better than $1000 for another rebuild! ;Sweet I'll try it this weekend. Thanks :thumbsup:
  6. Biggreen94

    Trans Problems Again!

    I checked the FIPL and it was 1.15 V at idle and 3.85 at WOT. So what else could it be? Trans is full, and its not running hot. :confused:
  7. Biggreen94

    Trans Problems Again!

    The trans in my truck(E4OD) is acting funny again. Pulling up to a stop sign it acts like the converter isn't unlocking. Driving down the road it wants to shift back in and out of overdrive. I also noticed the tach doesn't work at idle, but does work going down the road. :confused: Could this be...
  8. Biggreen94

    Trans Fluid?

    Thanks. ;Sweet
  9. Biggreen94

    Trans Fluid?

    Which trans fluid goes in the E4OD? I don't have the book to my truck and I can't find it anywhere on the truck. It was rebuilt about 5000 miles ago and I'm puttin on a new trans cooler and thought I would change the fluid while I was at it. Is it Mercon, Mercon-V or Mercon-SP :confused:
  10. Biggreen94

    Some questions?

    One more question. I just had the E4OD rebuilt about 5000 miles ago. I'm putting on a BIG trans cooler and thought I might as well change the trans filter while I was at it. Are there any trans fluids that work better in these transmissions, or are they all about the same. :confused:
  11. Biggreen94

    Is my DP gonna work???

    I got the Banks DP today. What a rip off!! :mad: I paid $100 for a 2 foot piece of pipe with a couple of small bends. A friend of mine at the exhaust shop told me he could make the same thing for about $15!!! I guess you live and learn :rolleyes:
  12. Biggreen94

    Some questions?

    Thanks everyone ;Sweet
  13. Biggreen94

    Some questions?

    Guages are on the way, and the 3inch DP and 4 inch exhaust will be on next week. ;Sweet As far as the guages go, I'm going with a Pyro, Boost and Trans Temp. I figured out the external screw, but where do I find the internal? :confused:
  14. Biggreen94

    Some questions?

    Since this is my first IDI truck, I have a few questions. I was reading about shortning the arm on the wastegate to increase the boost and was wondering about how you do this. My other question is which screw on the IP(internal & external) do you turn to increase the fuel. All this stuff was so...
  15. Biggreen94

    Is my DP gonna work???

    After the DP I'm going with a straight 4inch with the rear section for a 99 up 250. I got the rear section from Napa for $50. I got the idea from on here, but I can't find the thread about it now.

Latest posts

Forum statistics

Threads
91,294
Posts
1,129,856
Members
24,107
Latest member
lewisstevey7
Top