Recent content by 4x7.3NE

  1. 4x7.3NE

    What's Your Favorite Coolant Heater?

    Ok Bill, I will explain myself better I dont know how to post a pic of it! On the intake side of the heater you need to pull water from one of two places, the bottom of the block, or bottom radiator hose. The kit does not come with the t fitting so If you intend to use the radiator hose you...
  2. 4x7.3NE

    What's Your Favorite Coolant Heater?

    BigLug, Im pretty sure the yrs that have the IDI motors do have a vacuum valve. Mine has one it has a vacuum line going into the side of the heater box. Some of the older ones had a valve in the line that was manual or vacuum. But let me start over on that part, I was half asleep last night when...
  3. 4x7.3NE

    What's Your Favorite Coolant Heater?

    I have just been through the ringer with this engine heater thing! I tell you what I have learned. If you are going to use a block heater , use the factory screw in type. I tried a freeze plug heater from Kats , it was ok for about a week and quit. I also tried a simple bottom radiator...
  4. 4x7.3NE

    Ouestion about rim's and tire's

    265/75/16 are NOT the EXACT same height as 235/75/16s just a fact 265/75/16 are 31.6 diameter 235/75/16 are 29.9
  5. 4x7.3NE

    How can I Fix this...Plastic :(

    How about just putting a big cup in the cup holder or something so you cant see it and forget about it! Just an idea, I sometimes let small things like that worry me to death, but really it doesnt hurt anything. :dunno
  6. 4x7.3NE

    New guy with ????? on 99 7.3 ps miss

    How do you do this buzz test? I searched but didnt find it, does a dealer have to do it or what?
  7. 4x7.3NE

    New guy with ????? on 99 7.3 ps miss

    Ok Guys , I dont have a PS but my buddy does. He has a 99 7.3, the prob he is having is rough idle. He said it seems to miss at idle, vibrates and shakes the gear shift. After you rev it up like above 900 rpm it feels like it smoothes out. At highway speed it seems to run ok, he is not sure if...
  8. 4x7.3NE

    cold timing advance how do I know if its working

    update I figured out that my timing advance does work, I hot wired it to the batt and I hear it come on, so I guess now the ? is , is the temp switch that kicks in the idle and timing working?
  9. 4x7.3NE

    cold timing advance how do I know if its working

    Hey guys , I have the high idle figured out kind of, but how can you tell if the cold advance is working and if its not what do I check first? Also if the high idle and advance are not working where do you look first. I dont quite understand how this is all wired!
  10. 4x7.3NE

    Has anyone else noticed all the new members to the site?

    :thumbsup: I agree IH rules!!!!
  11. 4x7.3NE

    Has anyone else noticed all the new members to the site?

    I am one of the NEW GUYS LOL! My other favorite thing to do is mess with chainsaws and cut wood, no im not crazy at least not completely! Anyway I used to hang around on a chainsaw site and got board because of no new stuff going on. I have had 3 idi s for a while and just bought the last one, I...
  12. 4x7.3NE

    show off your IDI

    I got a pic of another one of my trucks today, so I thought Id post it and the white truck! The blue one is not so pretty but its a work truck and is loaded with elm in the pic! I just went and weighed it 11000 pds!
  13. 4x7.3NE

    Where does this wire go?

    I also have a wire not being used on my work pickup. The reason is my white truck has 3 wires on the fuel filter two on top and one on bottom. The work truck has diff filter and does not use one of the wires. The white truck has a aluminum bottom that goes under the filter, the work truck does...
  14. 4x7.3NE

    E4OD tranny

    I dont know what the big rvs weigh, But most of the time we are hauling cows around here. With a big fithwheel stock trailer and 10-15 cows = 10000-20000 pds and soft sandy ground and roads the e4od is pretty marginal, they do work and some last a while but way more get fried , we also run big...
  15. 4x7.3NE

    E4OD tranny

    Why the hell cant ford build a auto tranny thats worth a !#$% is what I want to know! You have to baby them and they still dont last half as long as the truck will. I wish all mine had the 5 speed!

Forum statistics

Threads
91,332
Posts
1,130,503
Members
24,133
Latest member
Nanohawk

Members online

Top