GenLightening
Yeah, it's a CHEVY!
Doug I sent you a PM. I want to buy a couple pumps.
Got it and sent one back. As far as WMO, a number of guys here are running 50/50 blends with no issues.
Doug I sent you a PM. I want to buy a couple pumps.
Im wanting to buy a facet sometime but Im still getting conflicting information about mounting. Some say its meant to pull, then some say its still ok to mount on the frame. Id rather mount it on the frame between the fsv and my goldenrod. This is my current setup with my elcheapo pump till I can get the spare funds to buy a facet.
Would where this pump is be to low and cause cavitation with a facet?
You must be registered for see images attach
Got it and sent one back. As far as WMO, a number of guys here are running 50/50 blends with no issues.
Some have them down on the frame and I haven't heard of any having problems. Anyone want to chime in?
on a wmo note i have run 75% and it messed the pump up. now the pump doesnt have enough pressure. so when im floored the fuel filter light comes on the dash comes on and the motor cuts out
as of right now im running kersone and diesel fuel and 3 quarts of atf and the pump will not keep up when im hammer down for more than a 1/8 mile
How did the screen look?
that sure doesn't sound right.
id be investigating your fuel filter(s) to see if the WMO you've run in the past didn't plug something up.
i took the pre filter out and that helped some as for the main filter i just replaced it. btw the bowl on the the pump will not fill up more than half way up idling
When did you change the filter? before or after the wmo went threw?