Carrier Pump Group Buy

[93cc7.3]

Got my pump today YAAY question is the bowl susposed to unscrew

 

[GenLightening]

It's really tight out of the box. Use your big boy muscles.

 

[93cc7.3]

lol ok didnt want to break it

 

[GenLightening]

That's usually the first question I get. Don't know why they put them on that tight at the factory.

 

[93cc7.3]

ya thats pretty crazy tight

 

[GenLightening]

The pump was designed for a trucker to work on, not us girly men!

 

[paulb3]

Lol yeah the bowls are on pretty damn tight I was scared the thing was going to break too.

Anyway showed off the pump to some friends and looks like I will be ordering 4 more!

 

[GenLightening]

Lol yeah the bowls are on pretty damn tight I was scared the thing was going to break too.

Anyway showed off the pump to some friends and looks like I will be ordering 4 more!

If they can wait until May of next year, I can deliver them!

 

[kcw12]

On the 69 I'm building it has a behind the seat gas, So it looks like i would have to mount this high in the engine compartment to prevent siphon, and the fuel pump quitting? Or can i mount them on frame under the cab and be done with it?

 

[Agnem]

I got mine too. It's going in the Lady Moose. I hope to do a tech article at the same time.

 

[93cc7.3]

Ill try to do a in depth write up to

 

[johneich]

On the 69 I'm building it has a behind the seat gas, So it looks like i would have to mount this high in the engine compartment to prevent siphon, and the fuel pump quitting? Or can i mount them on frame under the cab and be done with it?

You have to mount is as high as possible or cavitation sets in, these pumps are designed to pull fuel rather than push it, they don't like to be down low. Under your hood - top of one of the fender wells should work just fine.

 

[Fordman75]

Doug I sent you a PM. I want to buy a couple pumps.

 

[Cincinnati Guy]

Im wanting to buy a facet sometime but Im still getting conflicting information about mounting. Some say its meant to pull, then some say its still ok to mount on the frame. Id rather mount it on the frame between the fsv and my goldenrod. This is my current setup with my elcheapo pump till I can get the spare funds to buy a facet.

Would where this pump is be to low and cause cavitation with a facet?

You must be registered for see images attach

 

[Cincinnati Guy]

Im wanting to buy a facet sometime but Im still getting conflicting information about mounting. Some say its meant to pull, then some say its still ok to mount on the frame. Id rather mount it on the frame between the fsv and my goldenrod. This is my current setup with my elcheapo pump till I can get the spare funds to buy a facet.

Would where this pump is be to low and cause cavitation with a facet?

You must be registered for see images attach