RSchanz
Full Access Member
My blinkers/hazards & reverse lights aren't working anymore. I'm assuming they must be on the same fuse. Does anyone have any insight on this? Thank you!
At least they had more sense with the vans, both are near the fuse panel on the driver's side. I replaced the turn signal one last year because it was getting weak. AutoZone's system didn't know the part "552" on it's own because the dummy to made the database put the part # in the comments instead of in the part # field.Bullnose put the hazard flasher behind the glove box for some reason.......
Yep, but it also won't start in park. My F250 is that way. It acts like the electrical dies when you have it turn to crank when in park. It must be in neutral.also how is your neutral safety switch if its an auto a bad one will cause no reverse lights
when i bought my truck the blinkers and reverse lights didn't work and one day they just started working again the i lost it twice for about 30 seconds in the last 6 months
i have no clue what went on i did nothing to fix it i hope you get as lucky as i did
also how is your neutral safety switch if its an auto a bad one will cause no reverse lights
Tested the signal flasher on the front and it had continuity (.5) and tried the hazards while I had the fuse off and they still worked so confirmed that the front fuse is for blinkers. Considering it had continuity I sort of still want to try replacing it as this would be the easiest solution, haha.Hazards and signals both use separate flashers. I assume you've already checked fuses? Could be as simple as the flasher dying. I THINK the bullnose had the hazard flasher on the BACK of the fuse box, signal flasher should be on the front. Bullnose put the hazard flasher behind the glove box for some reason.......
Some thoughts.Update, the hazards do work but the blinkers don't, just checked in the parking lot at work (sorry I was driving earlier and it was raining). My guess would be the relay switch in the column? I'm now wondering if the reverse lights being out is a coincidence.
Check the wiring going to your backup switch at the transmission. Mine rubbed through and kept shorting and popping the fuse so I'd lose turn signals and reverse lights.
Some thoughts.
Do your front turn signals or dash turn signals work?
1) Sounds like a fuse or ground issue. But perhaps you found the fuse is burnt.
3) Reverse lights could be a different issue, so good thought. Go at them separately.
3) Check a wiring diagram.
A) Do you have power to the turn signal switch?
B) Do you have power coming from the turn signal switch?
Let us know what you find.
Before I start reading wiring diagram I'd look around at back of truck to make sure trailer wiring isn't damaged as circuits in question are separate.My blinkers/hazards & reverse lights aren't working anymore. I'm assuming they must be on the same fuse. Does anyone have any insight on this? Thank you!