cam position
- Thread starter ericwade381
- Start date
ericwade381
Full Access Member
Ok thank you my return lines and injectors are new so I hope I'm ok
ericwade381
Full Access Member
Took the e pump off went straight to the mech pump started and shut off cracked two lines nothing
Are you saying it won't run? It takes a lot of cranking to prime the fuel system after you've had it open with a mechanical pump. Go easy on the starter. 10 second bursts max followed by cool down time in between. It's one of the main reasons people switch to electric.
ericwade381
Full Access Member
Fuel line that I put in is leaking somewhere on the side where the metal line was track it down tomorrow. 
ericwade381
Full Access Member
The metal hose I replaced with a rubber fuel line not sure if it's leaking where it screws in the mech pump I put thread tape on it it was not leaking at all before I took the electric pump off weird
ericwade381
Full Access Member
Found the leak charged the batteries and she fired right up. Thanks guys
79jasper
Chickenhawk
Shouldn't use Teflon tape on those fuel fittings.
Good you got it running.
Sent from my SM-T537R4 using Tapatalk
Good you got it running.
Sent from my SM-T537R4 using Tapatalk
