Search results

  1. S

    Front end Noise

    Will driving slow and turning the wheel all the way I can feel the four wheel drive engage and start to grab. But when I start going faster it dose not do it anymore. The four wheel is in Nuetral and it still dose it. Is it my front end or is it the transfer case that is making this problem...
  2. S

    stacking edge chips

    Anyone have the juice stacked with a smarty programmer. How do you like it? Is it worth it?
  3. S

    Turbos

    I have an Hx 40 and also a hx35..I was wondering is it possible to take the 35 exhaust housing and compressor and combine it with the 40 inlet. Wanted to get some input before i take the 40 off of my truck ....The reason for doing this is that im only getting about 32 psi out of the 40 and was...
  4. S

    6.0 build

    anywhere from 750 and up
  5. S

    6.0 build

    that all sounds good ....I'll start looking into those companies. I don't know how much work I'm going to need internally (pistons, crank, rods, cam). Are there any companies in that area by any chance. I'm probably going to use a stand alone ecm.
  6. S

    stacking edge chips

    I have an 2001 with a edge juice with attitude. Im looking for the best way to stack this chip to get the best tune. I have heard the edge comp box is amazing soo i was wondering if i can use that with my chip if not what other options are there for this chip. I'm looking to go big soo the...
  7. S

    help

    Sry buddy but you blew your injection pump. The 24v pumps are lubricated with fuel pumped from your lift pump. When you put that chip to extreme you starved your pump. I would suggest a fass or airdog system soo you do not keep replacing pumps. The same thing happened to me on my 2001...
  8. S

    6.0 build

    Recently came across a totaled truck with a 6.0 in it and have decided to build it from the ground up. I am more familiar with cummins and duramax. I have been looking through old magazines to find articles but cant seem to come across anything. Im looking for companies that do heavey...
  9. S

    Black Stacks

    Looking for a website or company that sells 7 or 8inch black stacks. Any help would be great. Thanks guys
  10. S

    injector reccommendation

    There is also a company on Ebay that sells 150 hp injector nozzles in brand new stock injectors for $499.
  11. S

    Fuel Pressure Gauge or just use FAAS/Air Dog?

    I have a airdog system and I am confident in it that i dont have a gauge but it you really want one I know that airdog sells them seperatly if you get there kit....I actually should have a gauge just in case
  12. S

    Injectors

    How hard is it to switch the nozzles out off your stock injectors for a set of performance ones????? Are there any specialty tools required or is it pretty straight forward?? Or is it not worth the hassel and just buying performance injectors is better bang for the buck???
  13. S

    01 wont start

    I know that the chip i have would not hurt the injection pump in any way because it helps lubricate it but my is it possible that my airdog would because of the increased pressure it is pumping into the pump.
  14. S

    01 wont start

    On my way to the gas station my truck was starting to cut out like it was loosing fuel. The needle was a hair over E and it shut off... I have an airdog 150 installed and my suction tube is close to the side of the tank and when i installed it didn't really hit the bottom of the tank..(just to...
  15. S

    Fuel and Boost

    if yours has a braded hose coming off the waste gate either clamp it or remove it and see if you get more....yea im thinking of just going with injectors and seeeing what happens
  16. S

    Fuel and Boost

    Does adding more fuel generally make for more boost? Because I put an HX40 on my truck...and with an airdog 150 and edge at wot on 5 my turbo was only getting 30 psi...now i thought i would be getting at least 40 if not 45...is this normal or do i need injectors for more fuel and boost.....
  17. S

    HX40

    to make it easier it is a T3 to a T4 adaptor...if that makes more sence to people
  18. S

    HX40

    Any one know where i can buy an adaptor plate for an HX40 turbo for the stock manifold on my 01 cummins would be great ....dont care how much...i need it bad... truck is in pieces need it back together thanks....
  19. S

    VP44

    got the egde juice with attitude...sooo no need to mess with it...um I'm looking at the air dog and wondering it it will mess up my fuel pressure sensor that came witht the edge kit because one of the lines has to go were the sensor hooks up to and that is the return line on the injection...
  20. S

    boost

    ok sounds good ....i have an automatic....what could happen if you put the HX35 on an automatic (just wondering)......i will look into the HY35 but i was also thinking about a biger turbo of like a cummins generator or something along those lines what do you think
  21. S

    boost

    found out that my turbo has a mechanical waste gate that can not be bypassed by the edge computer sooo i need to order a j clip for it or get another turbo.....the wastegate is set at a 25 psi limit...on an 01 cummins with 235hp...
  22. S

    VP44

    I know on the mechanical P7100 on the 12v there are things you can tinker with to up timing and fuel.....i was wondering if there is a way to do that with the vp44 or to just leave it alone because it is electronic....... I plan on adding an airdog filtration system and was wondering if i...
  23. S

    boost

    thats what i thought it would be but wasn't sure.....I have to go back and check everything i had off thanx
  24. S

    boost

    I got a 01 24 valave with edage juice with attitude..... on stage five my gauges are only reading a max of 23 pounds at wide open throttle ....just wonderin if this is an accurate reading or im loosing boost somewhere...... Need answer kinda fast pulling tomorrow tring to get ready...thanx
  25. S

    turbo swap

    i pulled a bad turbo off of a brand new 08 Lmm duramax.....could that turbo ever bolt onto my 24v or would it be too much to make it work? I'm figuring it wont work but i thought i would ask around first to see what you thought....I'm guessing there would problems with the oil lines and the...

Latest posts

Forum statistics

Threads
91,333
Posts
1,130,557
Members
24,137
Latest member
m2rtin

Members online

Total: 687 (members: 1, guests: 686)

Share this page

Top