Search results

  1. 7

    Carrier fuel pump help needed.

    Looks like the part number is 42353 for the filter and gasket. http://www.facet-purolator.com/index.php?option=com_content&task=category&sectionid=5&id=32&Itemid=47
  2. 7

    Ave Shop charge for installing new IP?

    Just looked up time for a 91 E350. Labor time is 5.0 hours and warranty time is 3.9 hours.
  3. 7

    Ebay Starter

    I ordered the one from db also...... it was delivered today. I hope to install it this weekend if I get back in town. I was also planning to make up new battery cables this weekend too. I have some new 2/0 welding cable (it is even blue) and all the necessary ends.
  4. 7

    hot motor hard start and no power

    Sounds like my company truck when I lost 4 injectors, intake gasket, egr valve, egr cooler,and oil cooler.......all about a month after having the head gaskets done. Then 2 more injectors a couple of weeks later. Feels like it runs on 5 or maybe 6 cylinders when accelerating until engine is...
  5. 7

    IP suddenly stopped pumping

    I allways let mine idle down when switching fuels. Had a friend lose and ip while switching to wvo at highway speeds. He is now letting his return to idle when switching and has not had any more problems. I have a piezo timing tool if you need help getting it timed. I am NW of Atlanta off...
  6. 7

    Good news and bad news...

    lost 2 trans in my 79 300sd in the past 2 years, both because of reverse. I haven't gotten around to rebuilding either of them yet. Just put in a 722.3 and later model motor a couple of months ago. Quite a bit of grinding and fab work to make clearance for the rear of the oil pan. Didn't realize...
  7. 7

    Here's my next project: Homemade Nozzle Tester

    We talked about those here also. http://www.oilburners.net/forums/showthread.php?t=13946
  8. 7

    This cold weather is killing my truck

    Have you checked your thermometer lately?
  9. 7

    Another problem on a different car

    On 116 and 126 cars the gauges and brake lights share the same fuse. Maybe it is the same for a 123. Have you upgraded to the copper/brass fuses. Got them on ebay from a seller named gabe something. I used to have a lot of intermittent electrical problems when I was using the aluminum fuses.
  10. 7

    Stainless Steel Freeze Plugs

    Cool link! I had a city inspector try to give me a hard time on a multi-million dollar job because he thought, after performing a magnet test, that we didn't provide stainless as specified. He doesn't use the magnet test anymore. C&P from the link: All austenitic grades have very low...
  11. 7

    7.3 Alt. Belt???

    Is this the one? http://www.oilburners.net/forums/showthread.php?t=10087&highlight=pulley
  12. 7

    What lift-pump fuel pressure do MBZ run at?

    Fuel pressure testing procedure.
  13. 7

    Got some money to put in the old girl.

    Timing chain guides. I had one break last year while driving at 80 mph and it broke the chain, cam, cam towers, valve cover, and ruined a couple of the timing gears. The guide by the cam gear is pretty easy to change. The tensioner rail/guide is harder to change, and is the one that broke (at...
  14. 7

    Got some money to put in the old girl.

    Timing chain and guides, if it hasn't already been done.
  15. 7

    another IDI drinking WMO

    I have everything laying on a workbench to do this. Kaori 26 plate heat exchanger, 10 feet of hoh, coolant wrapped goldenrod, second pollack valve, and a holley blue pump. The hoh will be used for both tanks, from the existing pollack valve to the engine compartment. The second one will allow...
  16. 7

    Need Number for Front Wheel Bearing

    I just checked the napa site and they list the same number that you gave. Checked advance and they had two brands listed. One was the bca 15101 that you listed which has a 1.00" ID. The other was a motor city SLM102949 that has a 1.7812" ID, and the matching race is S15245. Hope this...
  17. 7

    88 F-350 Brakes

    Found a service bulletin that describes your problem.
  18. 7

    Homebuilt injector tester ?

    checked my 88 F350 injector today to see if a mercedes line would connect. It is the same (6mm tube, m12 by 1.5 threads). So it seems that you would be ok if you had a mercedes or volkswagen injector line. I know that the local foreign auto parts store can get me a vw injector line for less than...
  19. 7

    Homebuilt injector tester ?

    I'll try to identify a fitting next week, unless somebody beats me to it. I'll have to pull an injector line off the flatbed and go to the hydraulic shop to identify the correct size/style needed. I'm only set up for mercedes injectors and I'm sure that the ford are a different thread size...
  20. 7

    Homebuilt injector tester ?

    This link should get you started. It has links to a couple of other good threads. www.mercedesshop.com/shopforum/showthread.php?t=123573
  21. 7

    Homebuilt injector tester ?

    :rotflmao That's great, I didn't even notice the bowl in the picture before. LOL The picture is one that I got from from a thread at mercedesshop. I can't take a picture of mine because I broke the wifes digital camera and haven't given it back to her yet. Maybe she won't need it soon and I...
  22. 7

    Homebuilt injector tester ?

    Agreed! Also be sure to thoroughly flush out the tester before use. It doesn't take much to clog an injector. I had to reopen and clean three of the first set of five that I did.
  23. 7

    Homebuilt injector tester ?

    Exactly! The grease gun type is easier because of the drilling and tapping. There are at least three threads over at mercedesshop about building these. The ones that I found were at least a year old. I'm going out of town for a few days, but will try to find/post links to the threads when...
  24. 7

    Homebuilt injector tester ?

    I found the info over at mercedesshop a while back and built one of the bottle jack style. Drilling and tapping (3/4" npt) the cap could be a problem for some, but I had a friend who owns an industrial machine shop do it for me. If I build another one it will be the grease gun style. It looks...

Latest posts

Forum statistics

Threads
91,324
Posts
1,130,344
Members
24,130
Latest member
JFMac

Members online

Total: 560 (members: 14, guests: 546)

Share this page

Top