Search results

  1. IDI-IKE

    Gear oil as fuel

    Don't do it its puts allot of deposits in the combustion chamber and that oil is probably pretty spendy I would save it or try to sell it, Sounds like some of the oils we use in the roller cone and jaw crushers and screen decks here in the gravel pit and that shit is very expensive
  2. IDI-IKE

    Alternator V-belt pulley slipping when swapping to 3G alt

    I have no belt squeal with my 130 3g
  3. IDI-IKE

    Alternator V-belt pulley slipping when swapping to 3G alt

    Mine was from a taurus I had to grind the face a bit on mine as I read on a write up somewhere but all I can think is your black one is bad or you misplaced a shim or something inside
  4. IDI-IKE

    2021 Rally "Throw your hat in"

    I've always wanted to attend one but they are always so far
  5. IDI-IKE

    Alternator V-belt pulley slipping when swapping to 3G alt

    Take your die grinder with a sanding pad and remove a few thousands from these
  6. IDI-IKE

    2021 Rally "Throw your hat in"

    Lots of cool camp grounds in Wisconsin and we probably are one of the states with minimal covid restrictions. State park Camp sites book fast but Glenwood city Wisconsin is a County park and it's a beautiful place and usually pretty open. If it was considered as a option time frame could be...
  7. IDI-IKE

    Alternator V-belt pulley slipping when swapping to 3G alt

    Grind the housing only need to take a few thousands off
  8. IDI-IKE

    Alternator V-belt pulley slipping when swapping to 3G alt

    You need to take a grinder to the face of the 3G alternator and remove some of the material that the pulley is jamming up against, The triangular gusset looking area that's raised on the face of the alt is what your fighting
  9. IDI-IKE

    Banks sidewinder turbo rebuild

    The area you describe that is leaking sounds like its leaking blowby oil from the cdr out that area. I would pull the compressor housing I'm not sure if the housing is sealed to the cartridge with a oring or what maybe put a very small amount of rtv on the mating surface. Or its possible your...
  10. IDI-IKE

    Custom 60G glow plugs

    I just used what ever the common spade terminal on them. The 6.9 harness should plug right into them. Mine have been just amazing so far when its cold I glow for 15-20 seconds then continue glowing while I crank fires right up
  11. IDI-IKE

    The Official "Show Us Your Ride" pictures of member's trucks thread.

    I get upto 15 psi and my tubo is going to Russ he's going to work his magic on it. I would like a s257 or a s366 but I just don't know how to make it fit with the master cylinder so close the rajay turbo uses a centered inlet flange a typical turbo has the flange offset like a snail. But my...
  12. IDI-IKE

    2021 Rally Information

    We need a Wisconsin or Minnesota rally! beautiful county out here
  13. IDI-IKE

    Brownies? Aux trannies? Dual transfer cases? 2 speed axles?

    My 85 chevy C30 6.2 turbo 4 speed has a advance adapters ranger box waiting for it in my office. Its a direct, over 2 speed synchronized planetary that goes between the bellhosing and trans. They make them for ford and chevy but the trans has to have a removable bellhousing will NOT work on a...
  14. IDI-IKE

    TIMING SERVICE REGISTRY

    state: Wisconsin Town: Somerset Capability: pulse Equipment: bluepoint pulse adapter and timing light Contact: text me or call 715twotwotwo774nine Price: Free if you cool you come to me I time your truck
  15. IDI-IKE

    Manual fuel tank selector valves.

    I second mounting the switch right next to the valve if its accessible from the drivers seat. Otherwise I would honestly just use heavy duty black extension cord its 3 wires I would run the extension cord from the 3 fuel gauge wires to behind the dash and put the switch to them then you aren't...
  16. IDI-IKE

    Manual fuel tank selector valves.

    Couldn't you just use a 3 position switch on the dash for the sending unit wires? Or maybe retain the original selector switch?
  17. IDI-IKE

    A XJ named Guinea One - Kubota kit develpoment

    Did you give up? where's the updates
  18. IDI-IKE

    Ford 8000 with a 3208

    It is a semi truck but the F8000 was a pickup cab with a big tilt forward hood and the L8000 was a full on semi LTL cab. The F8000 came in single axle or tandem axle too some were specked pretty light others very heavy with double frames etc. The L9000 is when shit got real. I just don't...
  19. IDI-IKE

    Factory floor shifter for automatic???

    I'm thinking it was a t19 to c6 conversion and that's how they did that without changing the column because the tunnel is raised where the t19 shifter would be. Have to look at the door sticker at the trans code
  20. IDI-IKE

    DT360 build

    ditch the ppump?
  21. IDI-IKE

    Ford 8000 with a 3208

    3208s aren't bad at all they always fire up in the cold without being plugged in and as long as you do the obvious (keep oil in it, clean filters, warm up and cool downs, don't lug it they will do hundreds of thousands of miles. I have the predecessor 1100 series (1140) in my 69 F6000 ford its...
  22. IDI-IKE

    Ford 8000 with a 3208

    You will not fit a 3408 in a medium duty truck lol its a 18 liter beast found in heavy haul trucks and large mining equipment and big gen sets they are based off a 3406. We have a cat 988F wheel loader its a 105,000lb machine.
  23. IDI-IKE

    excess noise and loss of power

    Injection pump advance piston is sticking up. Pull your fuel filter and get a new one and fill it with atf and pop it on and start it for 10 seconds then shut it off and let it sit over night and add a quart or two of atf to your fuel tank if this doesn't fix it then it's time for a injection...
  24. IDI-IKE

    6.9 IDI-what kind of battery charger do I get from

    I can't stand smart chargers at all. I'm sure analog chargers have been at fault for many many fires because people forget them on. But at work we have 2 $750 associated 12/24v 250amp big bastards. Any time I see a old analog charger at a garage sale or sitting around I grab them up and clean...
  25. IDI-IKE

    Heat is turning cold... then hot... then cold... etc.

    Just popping back to say I put the new motorcraft thermostat in my plow truck and the heat is allot better

Latest posts

Forum statistics

Threads
93,001
Posts
1,155,994
Members
26,589
Latest member
tke395

Members online

Total: 848 (members: 4, guests: 844)

Share this page

Top