Search results

  1. OLDBULL8

    Injector line crack?

    Here is how the clamps should be on the injector lines. The return lines may be different than yours, but the clamps are correct. Look in the Merchandise forum for the lines.
  2. OLDBULL8

    Wrecked my truck today :(

    Trailer covered while attached to tow vehicle. That's why I never detach the trailer (5er) even when camping, unless I really have to. Ohio Progressive Ins.
  3. OLDBULL8

    Cost of Our Fuel Filter Housing

    Yeah, just sold one for $90 shipped with a $16 Racor fuel filter. Even deleted the heater for him with the 1/2" NPT plug. $11.15 shipping, $3.00 for the steel plug.
  4. OLDBULL8

    How much oil is normal in intake

    If you have the suction to the CDR coming from the front of the engine in place of the bolt cover for the IP, you shouldn't get hardly any oil suction, if it's from the valve cover, you should have a baffle under it.
  5. OLDBULL8

    7.3 idi misfire?

    If your going to buy rebuilt injectors be very careful from who you get them from. Type4, Conastogadiesel and R&D are your best sources. Read the http://www.oilburners.net/threads/the-oilburners-hall-of-shame.19805/ first.
  6. OLDBULL8

    7.3 idi misfire?

    In Idaho you get some pretty cold winters, I would make the Cold Hi Idle solenoid work. Here is how. Turn the key on but don't start, cycle the go peddle to the floor once. now see if the solenoid plunger has touched the IP throttle shaft tab, of course it has to be energized, see if it has...
  7. OLDBULL8

    ats 093 rubber bits

    Don't know what BITS are, but I think you mean Grommets. https://www.grainger.com/category/raw-materials-rubber-rubber-grommets/ecatalog/N-c1x/Ntt-grommets?sst=subset&ts_optout=true
  8. OLDBULL8

    Sterling 10.25 parking brake parts?

    It's not what the diff size is, it's whether it's a DRW or SRW. Any auto parts store has these. http://www.oreillyauto.com/site/c/detail/BHH0/H2317/01271.oap?year=1992&make=Ford&model=F-350&vi=5006999&ck=Search_drum+brake+hardware+kit_5006999_4848&keyword=drum+brake+hardware+kit
  9. OLDBULL8

    OK, so what side is this

    You can see by the pic I posted, the little tab on the end has to be under the adjusting bolt.
  10. OLDBULL8

    in search of unobtainium

    All the return line system fittings has to be either 3/16" or 1/4" fittings. There is no such fitting (cap) (1/4x1/4x3/16) anywhere that will fit on an injector. Whoops, need the fitting below, not a cap. If the original is 1/4", then the barb fitting on top of the IP is also 1/4", also the barb...
  11. OLDBULL8

    OK, so what side is this

    OEM or replacement parts marked right or left are designated setting in the truck looking forward. That part is on the passengers side. That's why we like to designate passenger or drivers side instead of right or left.
  12. OLDBULL8

    Going to get my idi tomorrow

    More then likely that it starts then dies is, crank crank fills the filter full of fuel, then starts till the filter runs out of fuel and dies. If it has only a 1/4 tank or less and the pickup foot (Shower Head) Pic below has fallen off or disintegrated, it will be sucking air, at idle RPM, it's...
  13. OLDBULL8

    Bull Moose vs. R&D pumps

    Honestly we should not discuss competing vendors on this forum, it should be kept to a repair forum. A discussion of competing vendors should be done in the Lounge forum. Just my opinion.
  14. OLDBULL8

    Can't get injection pump out

    BFH, a rubber one, smack it on the side towards the gear housing on the square for turning it.
  15. OLDBULL8

    Wtf

    DON'T KNOW WHY I DON'T SHOW AS A SUPPORTING MEMBER, PAID MY 20 BUCKS FOR A YEAR THREE FOUR MONTHS AGO. NO MORE SUPPORTING DUES FOR ME. http://www.oilburners.net/threads/orange-bar.78992/ GUESS I WAS JUST TALKING TO MYSELF ALSO.
  16. OLDBULL8

    Intake TO VP

    WOWEE. If you punched holes in the TOP layer, well you did not pay attention on how to punch holes in the bottom baffle. The new Valley Pans have slots in the Baffle instead of a couple of holes so oil can drain for Turbos. You DON'T need to drill any holes in the baffle. If you make any holes...
  17. OLDBULL8

    Taxes

    That's done on an honor system. Just don't advertise on any diesel forum that you do. There watching. Edit your post about doing it DELETE it. There is a forum on alternate fuels.
  18. OLDBULL8

    Throttle cable "all years" true

    83 to 93
  19. OLDBULL8

    Help identify what's wrong with my ill 7.3 IDI

    I have a new set of E code injectors and a Valley pan, don't remember if it's a Fel-Pro or Victor-Reinz. PM me if interested. Sorry, there A code for the early 6.9., really expensive now, only rebuilt are available.
  20. OLDBULL8

    Before I screw this up

    I don't see anything wrong with the circuit they sent you. There shouldn't be any 12VDC Positive power to the thermocouple, it's generates it's own voltage from heat. The light 12VDC Positive should come from the dimmer rheostat for instrument lighting or just 12VDC Positive when key is turned...
  21. OLDBULL8

    Turbo oil line olive

    If you can't describe it clearly, then post a pic of it. I don't know what he's talking about either.
  22. OLDBULL8

    Gear ratio input

    If you want rear wheel torque use 4:11, for mileage use 3:55, but just for a slidein, 3:55 should be good.
  23. OLDBULL8

    Intake TO VP

    @icanfixall I just sent one of those drain plugs to a guy in Cali, he lost his while doing a rebuild.
  24. OLDBULL8

    Hard brake pedal / intermittent brake light after booster & MC replacement

    Quote (It feels like the booster isn't working like it should but I don't know how to test it.) with the engine off and running before to produce a vacuum, just take the check valve out of the booster, you should hear air rush into the booster if it's a good one. IOf you still have the tomato...
  25. OLDBULL8

    What is this and why is it leaking?

    Even at dieselorings each Olive is $2.50, comes in sets of the three. There is two of them on that hard line filter to IP, there 5/16" ID and one 3/8" ID for the fuel hard line from the lift pump. Go over here and pester Darrin, he probably has some seals (Olives) He's a member here...

Latest posts

Forum statistics

Threads
93,001
Posts
1,155,996
Members
26,589
Latest member
tke395

Members online

Total: 910 (members: 6, guests: 904)

Share this page

Top