Search results

  1. pelky350

    Questioning my timing

    Oh, I noticed it was way closer than my first pump, basically any throttle applied and it's gonna me moving it almost couldn't be any closer to the roller that activated it without it starting to engage. Idk if I should be messing with it though if I'm still under warrantee on it?
  2. pelky350

    R&D Injector Durability Test Results

    Noticed more power with diesel extreme? Or just smoother running?
  3. pelky350

    Questioning my timing

    @wespaul, theoretically should be "tuned" right its only got like 30k on it r and d 90cc. It shouldn't need more fuel it's fuel sheet had like 106cc of fuel at 1000 rpms. So the lever on the side retards the timing with throttle applied when that "cam" moves it? And if it's falling on it's face...
  4. pelky350

    R&D Injector Durability Test Results

    Did you use a fuel lubricant supplement the life of the injectors? And you mentioned they had been through a couple truck in their life maybe the couple hanging up got something in the end just by changing them out? Nozzle tip Is a pretty small hole it would take much to get a piece of metal...
  5. pelky350

    Questioning my timing

    @Thewespaul i just can't tell though, the rattled is non existent after turbo spools up, it's only down low at abound 2000 under acceleration things start cleaning up finally till 2500ish and then it seems like I think just kinda signs out for the day. Boost stops building and no more pull just...
  6. pelky350

    Questioning my timing

    @genscripter i was going by feel of performances beforw but it seems towant me to advance it more. More advanced it gets a few more psi. However it sounds like I'm gonna kill it by how loud the "diesel rattle" gets. Louder than it's been before. The reason for wanting to time it with a meter is...
  7. pelky350

    Zf5 fluid

    Boot has always leaked, atf yes, and no other changes just fluid. Heat shields never been there or insulation
  8. pelky350

    Zf5 fluid

    I don't know about this new fluid in there, was driving for about 1.5 hours and I think the trans was getting really hot. Could smell the tranny fluid, feel heat radiating off the floor and even the stick was pretty warm. Unloaded driving about 75-80mph at 2300rpms in OD. Would the new fluid...
  9. pelky350

    Questioning my timing

    Oregon fuel injection timed my truck to their standards of however I don't belive they've had proper equiptment and I wasted my money. Truck smelt like raw fuel out exhaust etc timing was retarded. Gained some power advancing it a hair and no smelly hazy idle anymore. Today I was just messing...
  10. pelky350

    tick tick tick!!! S.O.B.

    So my tick tick tick and go boom also??? How did you run it and not notice a giant hole in the block??
  11. pelky350

    Electri Lift pump for 90cc?

    @gerlbaum was just trying to keep some crud from the pump tanks kinda old and dirty, @The_Josh_Bear carter 4070 pump. Also I thought that is where fuel pressure is tested? I could move it over to the other port then is there where pressure is after filter?
  12. pelky350

    Electri Lift pump for 90cc?

    Made this for about 110$ No pressure drops, runs smoothe. All that's left Is to get some wire covers for the harness
  13. pelky350

    Electri Lift pump for 90cc?

    No louder than a gas engines fuel pump, you know the typical buzzing noise but not over the engine noise, it's hardly noticeable in the cab when trucks not running. @Rossroams thats what I was curious of if for ford had made a kit for e-fuel that was more factory looking back then? @gerlbaum...
  14. pelky350

    Electri Lift pump for 90cc?

    Everywhere I read people just leave them down there it can't hit the crankshaft because of a oil baffle that keeps the rods from splashing through oil I believe
  15. pelky350

    Electri Lift pump for 90cc?

    What pump did ford install in the truck? I did mine with a wiring harness from summit and the carter pump only thing I had to come up with was part of a bracket to mount to my filter head. But carter came with a bracket already too.
  16. pelky350

    Electri Lift pump for 90cc?

    Carter was installed yesterday, it runs great! No fuel pressure loss while free revving anyway my mechical pump that was basically new would drop down to 1-0 just from a rev. Unfortunately my pump is leaving from the seam that connects the top housing to the bottom base, not terrible but summit...
  17. pelky350

    4WD on Dry Pavement

    I don't see what would hurt about a straight line if using 4x4L with hubs locked to get up the ramp, I wouldn't turn very much the truck will defiantly tell you it's not happy lol I use 4L to back up trailers sometimes with hubs unlocked since my zf5 has some crazy tall reverse gear and...
  18. pelky350

    Zf5 fluid

    Oh , it's been the same way since I got the truck boot Is detached from the plastic base
  19. pelky350

    Zf5 fluid

    Not the top cover of trans boot like my shifter In cab boot in the cab, I didnt over fill by a quart yet just topped off fluid this time through the normal fill plug. Like nothing has changed besides changing the fluid, I havent the noticed any leaks yet that are new but in can really smell the...
  20. pelky350

    Zf5 fluid

    Anyone know why I can constantly smell trans fluid now ? My shift boot has always been broken but now only after changing the fluid I can smell tranny fluid usually when I first start driving but maybe the whole time could just be getting used to it now. Or I went nose blind to the smell of the...
  21. pelky350

    getting the most out of my baby moose pump

    Oh, I was just going by what the website said? I thought baby moose was a stock turbo cal pump @Agnem
  22. pelky350

    Electri Lift pump for 90cc?

    I also noticed that some mentioned the carter is a pusher pump but everyone mountin it under the hood?
  23. pelky350

    getting the most out of my baby moose pump

    The baby moose is just a stock turbo cal pump if your not turning up the fuel at all then I would imagine any of the big three stock turbo turbos is all your gonna need/use with it's maybe a stage1 drop in from r and d as an upgrade but your not looking at running a huge charger with that set...
  24. pelky350

    Electri Lift pump for 90cc?

    I have the money for a fuel pump set up now, wondering if I should go carter 4070 4-6 or facet 9-12 psi? Or a higher psi carter? Carter seems to Ben in my mind for fuel flow over the facet, and the price difference but people swear by carter and facet so idk?
  25. pelky350

    Wicked wheel 2

    the results of eBay look like this! Works well too

Latest posts

Forum statistics

Threads
92,996
Posts
1,155,953
Members
26,579
Latest member
truckonfire

Members online

Total: 1,501 (members: 1, guests: 1,500)

Share this page

Top