Search results

  1. 1mouse3

    Three legged animal...

    This is not my first rodeo and this is the front cab mount that came with my f100 When I moved the body to a replacement frame, I had to rebuild this section of the floor. That bar that is bolted to the mount and is only straped to the original body in few places. The floor...
  2. 1mouse3

    kubota d1105 looses prime running

    I will try running the feed from a fuel can sunday and see what that dose.
  3. 1mouse3

    Three legged animal...

    I going to use bolts on the top lip where the mount meets the floor, with another stip of metal over the top since is all holey. That would let me crimp that edge together good and tight. I dont see why steel structural rivets, cant be used for the rest of the edges.
  4. 1mouse3

    Three legged animal...

    I dont see a option where the mount can be riveted to that front bit with it in the truck. The valid option I see is to remake that front bit, bending 16 gauge sheet could be done. Riveting to the floor and whats left of the brace, when riveted to mount is more plausible. So I cut what was in my...
  5. 1mouse3

    kubota d1105 looses prime running

    The was no return line left attached when I fixed the feed line in the tank, it was ran for some time like that with no issue, then it sat for close to a year and found it doing this. I dont have the return hose I just added all the way to the bottom, but far enough it will be submerged in the...
  6. 1mouse3

    kubota d1105 looses prime running

    This is on a ditch witch mini skid and the tank is on the side, they made the tank hard to remove. On the top side there is two rubber plugs, a brass fitting is popped in to it. Rubber hose gose on both side, in tank side they broke off and fell to the bottom. For the feed hose I used one of...
  7. 1mouse3

    Half-azzed paint job advice?

    A high build enamel will lay flat on its own and not need a perfect suffice to look good. You could look for a local paint shop and see if they can mix you some in a spray can, you can get a refill spray can and get a small bit from them if they dont. Just make sure the surfice is all scuffed up...
  8. 1mouse3

    kubota d1105 looses prime running

    The reurn line is new along with its hose that drops into the tank. When line was unhooked dealing with the injectors, it was self siphoning fuel from the tank. I will recheck the line off the IP and see if has a removable fitting I can check. This is the one I got and it has the right fitting...
  9. 1mouse3

    '86 Extended cab project thread

    That a is a interesting lab rat you have there.
  10. 1mouse3

    Three legged animal...

    So now on to cutting out the main chunk of the mount... And the bad section of the floor it attached to... I saw also that this top lip was tweked a bit... And the insulation was serving as sponge... So picked a spot to tug at the floor so can beat at it with a hammer...
  11. 1mouse3

    Three legged animal...

    So you must sail a similar ship as me running on the mine set of one mans trash is another mans treasure, the depth of the swamp is unkown till you dive head first into it. A shell is all I need to build the monster I wanted and that is what I got 10 years ago. I had the chance to drive both a...
  12. 1mouse3

    1989 F-250 7.3 Project

    I have 315/75r16 with f-super springs front/rear and 4in blocks in the rear. The general grabber a/tx tire I have give a good ride on the high way and minmal road noise. The only time I ever had the death wobble was when my track bar came loose. Also outer tie rods should be adjusted so the drag...
  13. 1mouse3

    Three legged animal...

    Did some digging and the grave yard has a differnet cab mount piece that is different. It has a added support piece, also is missing the ebrake cable hole and stamped different than oem. That piece that lcm shorted me on, is like 10 or 12 gauge and I dont have means to bend that up. Im not sure...
  14. 1mouse3

    Half-azzed paint job advice?

    As for rattle cans, I dont recomend them much. As for paint type, a high build enamel lays best for a single stage. A mix of both eat time waiting since there is no hardner in a rattle can, you have to wait for the paint to level out before using a heat gun on it. I used dupli-color hi-build on...
  15. 1mouse3

    Three legged animal...

    So now on to the mount... So that means the cab needs proped up... It dose take a few precarious placed pieces of wood... I only have two large stands, so the axle is precarious set on blocks to get the tire out the way.. Now for the autopsy... I am counting three...
  16. 1mouse3

    Three legged animal...

    One more round and thats it... This is as good as it will get and Im not going to fight getting rid of the last many black dots. So this is it cleaned up and painted. Used some tar remover first to try and neutralize the acid, then some parts cleaner since dont have mek on hand. Im ignoring...
  17. 1mouse3

    Three legged animal...

    Now about this fuzz... It just needs another aplication and a light brushing... Then after some minutes can wipe extra off and get to heavy brushing... One round is not enough, so another aplication... Then many rounds latter, the rain is telling me to stop. So have got it a...
  18. 1mouse3

    1989 F-250 7.3 Project

    If you have, Im not the person to ask about the wiring. There is not a good chance I made a wiring diagram, and yes I use all the same color wire for anti theft reasons. So good luck wiring gremlins if there is any. LOL :joker:
  19. 1mouse3

    Three legged animal...

    Well I started by scrbbling out a plan... Then I cut a slit in the base metal... Then stuffed a c-clamp in to flatten it up some... Then with the further cut patch back in place I can further flatten the base metal with the air hammer. I dont have time to try and make the...
  20. 1mouse3

    kubota d1105 looses prime running

    I am dealing with a kubota d1105 that is losing prime running and exhausted all paths I can think of past replacing the IP. I started by replacing both the feed and return line along with both filters, this solved nothing. So I pulled the mechanical lift pump, there was no sign of leaking into...
  21. 1mouse3

    Three legged animal...

    I would want to fix the water intrusion first before I think about carpet over the rubber mat that came with the truck, so unsure on the time when will cross that bridge.
  22. 1mouse3

    Foxbody style turbo setup 6.9IDI

    @IDIoit also made manifols of his own for his idi in the mancharo, when there is a will there is a way.
  23. 1mouse3

    1989 F-250 7.3 Project

    Yea and if the square peg dont fit in the round hole, grab a bigger hammer.
  24. 1mouse3

    Three legged animal...

    I had some time today to test fit the patch. This is how bad the fit was at first and did not get it much better. I marked it and cut out as much of the bad metal as could off the floor... and cut some off the patch that was fighting me and sank more screews in it. Im going to...
  25. 1mouse3

    Three legged animal...

    Yea, not even close and had me making stuff work. This show the piece with the jam switch I had to cut out vs the patch I made so can use what I had on the post. Even with the extra patch, there was limited area for it to attach to the original post. Then there is the area it is...

Latest posts

Forum statistics

Threads
92,996
Posts
1,155,942
Members
26,575
Latest member
Gerhard

Members online

Total: 1,689 (members: 7, guests: 1,682)

Share this page

Top