Search results

  1. 1mouse3

    Paint thick as molasses

    That is more than I asked for from this paint job, all I want is a somewhat durable thick coat that can easily be repaired. If like the the other high build I have used, it will level out a fair bit and might not take much to buff it smoth. I think I damaged orings tearing the gun apart for...
  2. 1mouse3

    Paint thick as molasses

    I tryed but it did not work out right, got blotch paint. Got it to do something but not what I wanted, did get enough paint on that it will fly.
  3. 1mouse3

    Three legged animal...

    I cleaned and sanded the area of the frame needing another coat, this shoot was the last of the other high build... Then took the easy way with a flap disk to get a good area... Then found green fuzz... Then clean up... I dont know if I broke the gun, got the mix too wrong...
  4. 1mouse3

    Paint thick as molasses

    Was satisfied with raddle cans, but high build ones are not in stock no more. So dug around to find this lvlp gun, as about the only decent option as something to shoot thick paint. I got a pint of high build paint to try at a mix of 5:1, so the 1.7mm tip might do for that. I also found this...
  5. 1mouse3

    Three legged animal...

    Scrubing phosphoric acid low rust metal, can give some newish looking serface for the mosr part... Then after scrubed several times and gives almost no flash of zinc, It rush to add primer before it sets after a wipe... Then some lesser enamal is thrown on it, the high build black I...
  6. 1mouse3

    parallel turbos

    I got the battery tray sorted and ready for install... So scrubed them with a rough pad, cleaned them, then reapled the acid and is left to marinade.
  7. 1mouse3

    Stick to the damn topic when posting

    Acid turns oxide from the brown to the purple club....
  8. 1mouse3

    So what did you do with your truck today?

    Crossing things off the list...
  9. 1mouse3

    Stick to the damn topic when posting

    ;burnout :joker: :smash: :sorry: :bail :popcorn
  10. 1mouse3

    Stick to the damn topic when posting

    Is this your way of getting the old girl to lose waight, with out telling her shes fat?
  11. 1mouse3

    circular base flange at end of exhaust?

    The term Im looking for is pony motor but not finding the video that inspired the thought. If the briggs has a carb, Im for and if not its the kohler Id take since stuck to carbs longer.
  12. 1mouse3

    circular base flange at end of exhaust?

    Id strap a small briggs to mine, rebuild the magnito and start a methanol still.
  13. 1mouse3

    circular base flange at end of exhaust?

    I dont see this ev stuff to be viable, if lithium are going to be the focas of development. There too volatile for something that has no benifits, to out weigh its state and is a rare earth item of scarcity. With a ice engines, there is other subsitutes for fuel. For gas there is wood gas and...
  14. 1mouse3

    Grab Handles

    Im thinking about doing something similar but would get a pair of these for to go on both side, using the seat belt as one is hard to grab. https://www.ebay.com/itm/271404413872?hash=item3f30f6b3b0:g:SasAAOxyVaBS6jAt
  15. 1mouse3

    Cup holders

    Well the coins like to bounce out, so gave up on keeping them in there home and are safer under the gauge or cup. Yes, that is the safest place to keep it since needs to come along for the ride.
  16. 1mouse3

    parallel turbos

    I got a batch of painted parts... And some paint thrown on the core, so its assembled for the final time. Then had to find where I stashed the hardware for the filter head... And got that assembled as well, need find where I got the extra newer hose since this roughly 10 year...
  17. 1mouse3

    So what did you do with your truck today?

    Things getting drug out, so lip stick on a pig just to do something... It starts with a partial clean up and acid, to maybe stop the rust... Then primer, that might stick... Then some engine enamel, that lays way to thin... This lot got done with more care for out come than...
  18. 1mouse3

    The problem with new brake shoes and the parking brake.

    Thanks @Selahdoor for bringing up these notes from Garbage Mechanic. My rear brakes were never making sense and I just ended up leaving them a little loose, but not loose enough that they fall apart. I could get them where they work good and where fine running short distances, but after a bit...
  19. 1mouse3

    parallel turbos

    I got my self a way to open the hood. I aint going to try bending this think of metal without a brake, so bought a premade object. I also put some acid on the core support, so wont wither away on me... And same for all the brackets need to assemble it, paint will be another day. The...
  20. 1mouse3

    parallel turbos

    The state of the core support, is in send it state and at least its mounts points are still there. Every one I have found in the yard so far on a diesel truck, have been rusted to point of being unuseable. Im going to run with this till l cant no more, or when I can fit a new one in budget.
  21. 1mouse3

    Cup holders

    @Nero, I found a lead on gas tanks straps that would serve to hold this power steering reservoir in place. The mail man has given me one the two I found, and means I can keep this choice since wiill now stay put. I thinks cupholders and stash spot is interchangeable, along with baggys...
  22. 1mouse3

    Cup holders

    You are searching the wrong term, try flywheel housing and see what you get.
  23. 1mouse3

    Cup holders

    I think read some where that the idi and mv-404/446, have the same bolt circle for the flywheel housing. What about the sae pattern of MV gas engines from IH?
  24. 1mouse3

    parallel turbos

    That core had nerver fit well and passenger fender was replaced do to damage, by the last owner and the top fender mount on the cab is tweeked. I dont want to be forcing that core to fit again and hope I dont have fitment issues with the intercooler, so sorting it before reinstall. The core...
  25. 1mouse3

    parallel turbos

    Just winging it with a stake... And 3 straps... I got a gap and this much stayed after releasing tention on the green one, will see if it stays next I see it.

Latest posts

Forum statistics

Threads
92,996
Posts
1,155,946
Members
26,578
Latest member
dogdanblue

Members online

Total: 1,410 (members: 5, guests: 1,405)

Share this page

Top