Search results

  1. Kdo58

    Classic Diesel Designs 61mm drop in replacement for a banks turbo.

    It's galvanized, not sure if I will keep it, or tape it together for jig and have someone make one out of aluminum or stainless.
  2. Kdo58

    Exhaust Temperature probe question

    Ok so I am going to plug the original hole and drill and tap a hole in the exhaust manifold.
  3. Kdo58

    Exhaust Temperature probe question

    Do I need to find a different adapter or fitting
  4. Kdo58

    Classic Diesel Designs 61mm drop in replacement for a banks turbo.

    And it mocked up, next will be the intercooler pipes
  5. Kdo58

    Classic Diesel Designs 61mm drop in replacement for a banks turbo.

    My new filter came into day, here is the difference between a stock banks size filter and power stroke filter
  6. Kdo58

    Classic Diesel Designs 61mm drop in replacement for a banks turbo.

    Thanks to Amazon I got the 4"×3" turbo adapter looks like it will work. It's a tight fit the cdr is really close to the clutch master cylinder.
  7. Kdo58

    Classic Diesel Designs 61mm drop in replacement for a banks turbo.

    Yea somethings fb is good for, but a build thread is not one of them, I could not find any info on doing this on the internet, I was having guys pm me on how it was going, so I thought I would just post here. And let them know to come here.
  8. Kdo58

    Classic Diesel Designs 61mm drop in replacement for a banks turbo.

    So I started looking at my old banks system, and figure out I would have to use part of it. So I would need a 4x3 intercooler adapter. I went to the plumbing store to see if they had some that might work, but they didn't so I had to order one off the internet.
  9. Kdo58

    Classic Diesel Designs 61mm drop in replacement for a banks turbo.

    The next issues was the intake, the banks is 3" and the 61mm cdd is 4" I thought I was going to run a whole new intake tube and run it over to the fender, but the injection line is in the way.
  10. Kdo58

    Classic Diesel Designs 61mm drop in replacement for a banks turbo.

    The banks comes with a block plate for the oil feed, this will bolt up with same bolt holes, the Garrett is sae, banks is metric no big deal so I just bought the right size bolts.
  11. Kdo58

    Classic Diesel Designs 61mm drop in replacement for a banks turbo.

    Next was the oil drain tube, the banks is metric and the 61mm garret is sae/american, 3/8" bolt holes, a easy fix I just drilled out the hole in the drain tube.
  12. Kdo58

    Classic Diesel Designs 61mm drop in replacement for a banks turbo.

    It's not exactly drop in, the first obstacle was the exhaust down pipe, it comes with a adapter to connect the 61mm to the banks down pipe. It seams the adapter could gave been made with a double flanges so it could have been just clamped on. But it needs to be welded on, I have a mig welder...
  13. Kdo58

    Classic Diesel Designs 61mm drop in replacement for a banks turbo.

    Starting a thread on my journey on installation of a cdd 61mm, I could not find anything on the internet.
  14. Kdo58

    So what did you do with your truck today?

    While waiting on some intercooler elbow I redid my driver side wheel well, removed the oil soaked insulation and installed kill mat.
  15. Kdo58

    What brakes do you suggest?

    I have power stop rotors and pads on a old rx7, they work great, I will be buying them for my truck, if they are available.
  16. Kdo58

    No start without starting fluid.

    Ohm testing never worked for me. I pull them out and hook up to battery source to see if they turn red hot. And I have mine on a monetary switch, if one is bad you can tell right away.
  17. Kdo58

    No start without starting fluid.

    From my slide rule
  18. Kdo58

    E-fuel pump install, hose route, filter Qs

    Somelse has a kit
  19. Kdo58

    Stuttering / whiteish smoke

    Came with Came with a factory service manual I bought off of ebay.
  20. Kdo58

    Stuttering / whiteish smoke

    Different possibilities
  21. Kdo58

    Turbo oil feed

    A small pipe wrench
  22. Kdo58

    CDD fuel filter and holly pump

    I did not run a fuel regulator with my holley, I have a turbo.
  23. Kdo58

    6.9idi clutch

    Yes order a luk kit, pretty much single mass is the only option.
  24. Kdo58

    Persistent coolant leak

    I had a tough leak, to find, it was the main hose at the thermostat housing. Found it using a inspection camera.
  25. Kdo58

    lets see your custom CCV concoctions

    R&d says to just dump it to the atmosphere, I have to much blow by. For that.

Latest posts

Forum statistics

Threads
92,996
Posts
1,155,942
Members
26,575
Latest member
Gerhard

Members online

Total: 1,605 (members: 4, guests: 1,601)

Share this page

Top