Search results

  1. 03wr250f

    Idi dyno tests

    276/642 truck is not squatted, just the angle 3.55 gears 33s dynod in 4th idit block, 093 hot side, r&d stage 1 drop in turbo, stage 1 injectors, factory turbo pump maxed, 10psi fuel pressure, 3" down pipe, cold air intake, hypermax intercooler, arp head studs, comp valve springs, 13"...
  2. 03wr250f

    Idi dyno tests

    buddy bills 6.9 torque to yeild head studs, budget built motor, homemade turbo kit, large borg warner s300 framed turbo, at the time t19, 90cc pump, facet fuel pump,stock injectors 3.55 gears 33s shortly after, he realized the carpet was limiting throttle, fixed a boost leak, made like 4-5...
  3. 03wr250f

    Idi dyno tests

    justins bronco o believe this is his 466hp run
  4. 03wr250f

    Idi dyno tests

    mods in video description
  5. 03wr250f

    Idi dyno tests

    226/501 hypermax intercooler 093 ww2 3" downpipe 7 psi boost 4.10 zf5 4x4 33s dynod in 4th gear
  6. 03wr250f

    Sky's Offroad RS Kit's Problem

    https://www.oilburners.net/threads/how-to-set-up-a-reverse-shackle-kit.92606/#post-1124294 this might help similar setup with the rear if ya have questions pm me
  7. 03wr250f

    Ford Factory E-Locker Teardown (and some discussion)

    where did you put your passthrough? i would love to see that I added a cable passthrough that is waterproof about where the factory one should have been
  8. 03wr250f

    Battle Born Brakes

    I have their kit, installed it at the same as a lee power steering kit. It works good, i also installed it at the same time as a lee power steering pump. My only complaint is the pedal is incredibly firm, like a vacuum booster without vacuum. Beyond that, it works exactly as described, brakes...
  9. 03wr250f

    How hot is too hot

    ah ok that would make total and complete sense a customer of mine does the same thing, looped cooling system, no radiator, 27 psi rad cap, and my fan for air cooling purposes, apparently it still does a great job of pushing sir over the motor so much so it actually does some air cooling
  10. 03wr250f

    How hot is too hot

    the heck were you doing? and for sure you have something wrong with your rig, likely a fan clutch as for the op, 220* is not outside the realm of normal, however if you arent hearing the fan clutch lock at 220* i would absolutely suspect a bad fan clutch. i would replace it and retest...
  11. 03wr250f

    6.9 & 7.3 idi electric fan clutch conversion

    just email me directly! not to the point of having a web store yet!
  12. 03wr250f

    6.9 & 7.3 idi electric fan clutch conversion

    and maybe because i have gotten used to the noise, or my sound deadened does a great job, the 60% is a dull roar, and the 100% you know it is on, but not obnoxious a mechanical fan clutch if working should lock and have the same noise level as my fan clutch however if you have a stock fan, or a...
  13. 03wr250f

    6.9 & 7.3 idi electric fan clutch conversion

    anyone else have any long term reviews of how their fan and/or clutch are holding up? mine has been doing great so far the only failure i have had, was the fan clutch failed to lock in, i was pulling a mountain pass this winter and i hit 220* coolant and oil temp at the top, and never heard the...
  14. 03wr250f

    Champion radiators and fan shroud

    https://a.co/d/ifWBXUT this or 90* bulb seal is what i used i didnt notice any cooling improvements, but it made me feel better
  15. 03wr250f

    Need another port to feed Banks turbo besides the sending unit and bell housing near filter.

    just t off the oil pressure sensor at the back of the intake
  16. 03wr250f

    Hydro boost question

    that a a ron guy is a D!ck! lol I did the battle born brake kit Lee power steering pump with extra hydroboost return on the housing, It is a plug and play/direct bolt in hydroboost upgrade from the factory booster it is the same mounting distance for the master, so I my case it wouldn't run...
  17. 03wr250f

    7.3 temperature gauge dropping under load

    put a aftermarket coolant temp gauge and a napa brand (stant reboxed) 13 psi cap on it see what it does from there. fan clutch should lock on first cold start of the day and run for about 30 sec to 2 min before getting significantly quieter. Basically should sound like a schoolbus/ airplane...
  18. 03wr250f

    Squealing Noise Until Operating Temp

    as others have said likely belt noise. Pulling the belt and firing it up will confirm that. I would be questioning the belt itself, try putting valve grind compound on it, and see if it helps. as others have said it could be alternator, causing the squeal, and that is most likely, also how is...
  19. 03wr250f

    2025 Rally!

    i doubt i will be able to make it, being 2200 miles away, but who knows. I will discuss with my wife. I am happy to see the tradition being carried on
  20. 03wr250f

    Rock Auto, scam on shipping?

    I love rock auto, but it has its place. Yes sometimes they do jerk you around with warehouses and shipping, but it is just part of the game. They are significantly cheaper than box stores, and i do often find the part numbers i want on rockauto, and then compare to amazon, and make sure the...
  21. 03wr250f

    New age headlights

    low beam^ w fog lights high beam \/ with light bar
  22. 03wr250f

    New age headlights

    on my truck about 7 years ago i bought aussie headlights, shipped them over and then retrofitted 5x7 headlight housings with a 35w hid projector morimoto mini h1 7.0 in 4500k color. since then I have added a set of diode dynamics ss3 max fog lights in amber and a set of dd ss3 sport driving...
  23. 03wr250f

    E4OD, preferred stacked plate cooler?

    the tru cool listed above is good, but i would run in addition to the radiator cooler a 6.0 trans cooler as they are cheap and readily available, and MASSIVE.

Forum statistics

Threads
92,996
Posts
1,155,941
Members
26,573
Latest member
Oiler

Members online

Top