Search results

  1. IDIoit

    7.3 idi Girdle and oil pick up support >>PROBLEM<<

    i opened up the hole, and deleted the washer on that stud. dont have a pic with the oil pump and sump installed, but it bolted right up
  2. IDIoit

    Bandaid on a bullet wound

    FIXED FOR YA BUD!
  3. IDIoit

    Bandaid on a bullet wound

    first off, these trucks are not for the faint of heart. i jumped into these trucks completely and have quite of bit of coin in mine. its also very custom, and a daily driver. first off, lets address the oil youre running.. across the board these things drink rotella like a margarita on cinco de...
  4. IDIoit

    Can a tranny support be purchased that already has a tapered Box/ramp built specifically for My vehicle or do i need to purchase a copy of "Steel fab

    i didnt even bother looking, i just made it
  5. IDIoit

    How To: Remove That Infamous Top Starter Bolt

    2"
  6. IDIoit

    The Drool Bus

    i couldnt imagine this thing with an IDI lol i love those engines, but not for towing. they are better served putting in a 4000 pound truck with 4 wd its expensive to create power, but cheap to lower the weight it needs to carry lol i now have a line on a late 80's IH 4100, guy wants the...
  7. IDIoit

    7.3 turbo engine debate

    on another note, i followed the ARP directions for my lower studs. and cracked a block. now i thread in all the way by hand, back out 3/4 of a turn, with loctite and let sit for a few days before finalizing.
  8. IDIoit

    7.3 turbo engine debate

    just dropping this on yall since youre on the subject
  9. IDIoit

    The Drool Bus

    recently bought a 23' van based RV. quickly found out that it wont tow 10,000 pounds.. im also building a rock crawler to accompany my ranchero on offroad excursions. so the need for something big has evidently been in my future. i found something i fell in love with. and the pieces are just...
  10. IDIoit

    7.3 turbo engine debate

    not to throw you off the path you want to travel... i know the family that this engine came from. it used to be his fathers truck, and the truck ran very well every time i saw it. it was only in the past 8-9 months than the truck ran on a daily basis, when Cody bought it from his pops. both...
  11. IDIoit

    So what did you do with your truck today?

    shifter saturday
  12. IDIoit

    Bringin home the kids truck

    after a couple more grand down the drain, i believe i have fixed most of the issues, got new tires and today i started on the trans cover to finalize it for interior. tomorrow ill make some shifters, get the boots all in, and maybe... carpet. ill have to check in with the kid and see if he...
  13. IDIoit

    So what did you do with your truck today?

    new shoes, and put this into daily driver status today!
  14. IDIoit

    IDI block = IDIT block

    first off, i highly doubt Justin would argue the fact that there are several differences, as i posted earlier i know the guy personally, and the differences i pointed out arnt my opinion or hearsay. they are indeed fact. anyone that knows these engines will admit to this. but the only...
  15. IDIoit

    Power Steering pump? Need confirmation please

    yes fluid will spill when turning the wheels without it running, usually out of the reservoir does your ambulance have vacuum or hydrobooster?
  16. IDIoit

    Moose or CCD injection pump?

    used to be a huge supporter of conestoga. after getting the shaft on a set of mister injectors and a omega moose pump, i threw in the towel
  17. IDIoit

    IDI block = IDIT block

    FIRST AND FOREMOST THIS IS A BOOB COMMUNITY THEREFORE, THEY ARE CALLED TIDI'S :love: TIDI blocks also have larger oil galleys. TIDI uses a differently balanced crank, which the flexplate/flywheel and balancer is also different. TIDI also used different material in the valves.... TIDI also uses...
  18. IDIoit

    6.9 truck harness to 7.3 IDI engine harness

    you most certainly can, remember... SOLDER AND SHRINKWRAP!
  19. IDIoit

    6.9 truck harness to 7.3 IDI engine harness

    this book is instrumental when rewiring. you could rig this up to your stock gauges. but would be smart to get a set of aftermarkets...
  20. IDIoit

    6.9 truck harness to 7.3 IDI engine harness

    i also grab some relays and pigtails and run relays for: headlights fuel pump and any other aftermarket stuff like lights etc.
  21. IDIoit

    6.9 truck harness to 7.3 IDI engine harness

    i would stop right there, gut it all and use a aftermarket wiring harness. i have done several trucks with the EZ wire 22 circuit wiring harness. they cost $200 and i usually have another $100 into pig tails, solder, shrink wrap, etc. i also splurge on good gauges. heres my daily driver and...
  22. IDIoit

    Show us what you tow!

    toys
  23. IDIoit

    97 f250 7.3 psd back fire out ehxhaust

    ive had one that back fired out of the exhaust, turns out the piston skirt broke, piston hit the exhaust valve and fuggered it up
  24. IDIoit

    01 SD Crew Cab w/ 6 doors

    back on this beach!
  25. IDIoit

    Conestoga Diesel (in PA) = Moose Diesel (in SC)?

    laughs in CA fuel prices

Latest posts

Forum statistics

Threads
92,997
Posts
1,155,936
Members
26,574
Latest member
sramasya

Members online

Total: 1,583 (members: 9, guests: 1,574)

Share this page

Top