Search results

  1. BioFarmer93

    Clutch master cylinder tube blow out...

    Raven- yeah, the color was what was throwing me.. On my two reds, the light blue stripe is barely discernible at all- didn't even see them the first time around so thanks for clarifying with the photo!;Sweet Billy- Thanks man, but don't trouble yourself.. It turns out that the fitting was in...
  2. BioFarmer93

    Clutch master cylinder tube blow out...

    Ah, so... Out the door I go... Oh- at this point can I twist the two reds and the two greens together and eliminate that whole pain-in-the-ass process?
  3. BioFarmer93

    Clutch master cylinder tube blow out...

    New hose/tube might have to wait on next payday unless its existing fitting is bad.. I was reading around & talking with a mechanic and all sources say replace the slave cyl. as well- coupled with a new hose that tally's up to a nice little chunk of change that wasn't budgeted into this pay...
  4. BioFarmer93

    Clutch master cylinder tube blow out...

    Lost pedal the other morning on the way to work, but managed to float gears with no full stops back to the casa and kill/brake in my regular parking spot.. I figured it was the bushing or pin or even the hole on the shaft finally wallowed out and let go, so I hit Advance and picked up a new...
  5. BioFarmer93

    Fuel Pressure Gauge Mounting

    Ken, I see that you went with the clear bubble spotter tube on the fuel return.. Why not extend that logic? Replace the hard line from filter head to IP with some transparent yellow Tygon- just put the schrader valve back in its original position, use that Tee with gauge at the IP supply with a...
  6. BioFarmer93

    Diesel + Hydrogen = WHOooaaa!

    No doubt it's working, that's for sure! I hope the "quart sized bottle" was thin plastic, not glass?? Not trying to play school teacher here, but that's the main way that people become blind, deaf, crippled etc. with HHO. Hydrogen in air (lotsa nitrogen) has a flame speed just barely faster than...
  7. BioFarmer93

    Diesel + Hydrogen = WHOooaaa!

    It gives a smaller benefit- primarily because it's using some of the O2 that would otherwise be available for the diesel fuel burn. The differences between bottled H2 and fresh HHO as combustion enhancers is one of the things that has been well documented, however those results were for a N-A...
  8. BioFarmer93

    Diesel + Hydrogen = WHOooaaa!

    -Faster flame propagation (flame front) makes for higher specific impulse and lower temps (less time spent burning cancels out higher temp fuel type). You are very much on the right track in your thinking about the waste heat.;Sweet
  9. BioFarmer93

    Diesel + Hydrogen = WHOooaaa!

    Hydro-IDI, 4LPM@25A? You're pumpin' (high moisture content, not necessarily visible) steam my friend, no way in God's green earth is that all HHO. 1LPM of clean dry HHO @ 10A is kickin' MAJOR ass, and only a handful of very dedicated backyard scientists have been able to achieve it, and it dang...
  10. BioFarmer93

    Diesel + Hydrogen = WHOooaaa!

    Matrix- I won't swear to it but I'm pretty sure that was about making just H2, not HHO (Brown's gas). Making H2 chemically is about as easy as falling off of a log, just dump a handful of iron filings into a glass bottle with some dilute H2SO4 (battery acid) in it and quick stretch a balloon...
  11. BioFarmer93

    Diesel + Hydrogen = WHOooaaa!

    Hey Bob, Yes it's all together and mounted on its installation board along with the mist stopper and desiccant dryer, I just haven't mounted it up yet in Henry or swapped in the 150A alternator. It's just sitting, taking up room in the garage- I haven't felt the same urgency to re-install it...
  12. BioFarmer93

    charging system - times running out for the rally! HELP

    Only thing about the one-wire's is that they tend to undercharge sometimes because the sense wire is internally jumpered to the output. This causes the regulator to receive an overly optimistic voltage reading and not increase the field voltage by a sufficient amount to make the alternator bring...
  13. BioFarmer93

    charging system - times running out for the rally! HELP

    OK, just read this whole thread- something doesn't jibe... I'm gonna assume there's a good electrical ground through the alt case to engine block to frame. So, detach small wires from alt to regulater, make sure big positive wire from alt output to battery positive is connected. Locate field...
  14. BioFarmer93

    Water/Meth

    No, that is entirely false- are you sure you weren't accidentally reading about water/meth in relationship to a gasser rather than diesel?:confused:
  15. BioFarmer93

    How do you tell yourself no? - Buying an extra truck

    I CAN PERSONALLY ATTEST TO THE VALIDITY OF THAT STATEMENT!
  16. BioFarmer93

    Need good affordable aftermaket filter and water separator

    Why out from under the hood?? I think I read here in a post a few weeks ago that the PSD filters go to 6micron... Do we need that? I don't know.. It's hard to sort fact from opinion on here sometimes, as many times opinion is offered as fact. Why not on the frame rail? Besides the scenario I...
  17. BioFarmer93

    Need good affordable aftermaket filter and water separator

    GW- The see through one is 17micron and the spin-on is 10micron- both are water blocks... One thing to consider about the frame rail mount, is that it will only need tending when you're out on the road in the rain. It's a great place for e-pumps, but I'd personally do a reconsideration of its...
  18. BioFarmer93

    Need good affordable aftermaket filter and water separator

    I just use a cleanable 40micron see-through chunk stopper before the pump, and where the stock filter head and filter would mount, I fabbed a bracket and mounted a 10micron Goldenrod spin-on waterblock like this- http://www.northerntool.com/shop/tools/product_910858_910858 Since I have a...
  19. BioFarmer93

    DUAL alternators with a serp belt setup possible????

    Also, when I couldn't find the belt anywhere locally that I needed for that set up, I found out that these guys have EVERYTHING. http://www.vbeltsupply.com/ecommerce/k-series-poly/k-series-poly
  20. BioFarmer93

    DUAL alternators with a serp belt setup possible????

    http://www.zena.net/htdocs/feedback/custs.shtml#Top <----- All these people seem to think it's caca caliente for welding, and my buddy the welder said that the high frequency DC that the electronics package that comes with it makes the best welds (I don't know, I'm just a hobby welder). I used...
  21. BioFarmer93

    DUAL alternators with a serp belt setup possible????

    You could do it like this- I just centered and mounted a drive pulley on the front of my PS pump pulley & made a bracket that mounts onto the A/C compressor bracket. Shown is a Zena mobile welding alternator with electronic controls.
  22. BioFarmer93

    have a few questions after turbo install

    That's kind of far away isn't it? I thought they supposed to be in the exhaust manifold between the last cylinder inlet and the flange?? Also, if it is a K type probe, would that distance explain such a large heat loss?
  23. BioFarmer93

    diesle logic glow plugs

    Diesel Logic plugs = Diesel Rx plugs = Wellman's I thought this was the case, but had to check it out first- DIESEL Rx - BY WELLMAN A WELLMAN AUTOMOTIVE PRODUCTS INC. DISTRIBUTOR WAP INC. PRODUCTS "QUALITY GLOW PLUGS AT DISCOUNT PRICES" The first set of...
  24. BioFarmer93

    idi N/A to idi turbo ?

    Cop or not, time constrained or not, you're a 12 post noob that just called a long time member in good standing an ASS. This does not serve in any way to endear your to others in this forum. The way you speak to a snotty 17 year old that you just popped for 75 in a 55 just does not cut it in...
  25. BioFarmer93

    Got showerhead?!

    Towcat makes a good point there- but the hose mod worries me at some level, so I just straightened the bends in the steel pickup tube little by little while observing the bottom clearance through the filler neck until the the tube was within 1/8" of the tank bottom. I made a little strainer bag...

Latest posts

Forum statistics

Threads
92,929
Posts
1,155,105
Members
26,430
Latest member
Brownlee5212

Members online

Total: 616 (members: 1, guests: 615)

Share this page

Top