Search results

  1. BioFarmer93

    performance electronic fuel pump

    Walbro Industrial E-Lift Pumps. Made in Michigan. Has pressures and flow rates for whatever you think you may need- even though it sounds like a standard FRB-13 will more than meet your needs. Easily the most dependable unit out there, and if you want even MORE dependability, get the Industrial...
  2. BioFarmer93

    WMO and centrifuge system for sale N.E. Fla.

    Babysit? Nah, no babysitting needed. Just turn it on and do other stuff. It has an electric motor that spins a power steering pump, belt and pulley deal. The pump pressure spins the thing. The filter bag and the centrifuge both clean down to 0.5 micron- cleaner than commercial #2 diesel. I'm...
  3. BioFarmer93

    WMO setup in N.E. Fla.

    Henry has been sold for over a year now, but I still have the entire WMO system and about 150 gal of WMO (some thinned and filtered, some not) sitting in the garage. I need the space now for other endeavors. $200 takes 4 barrels, motor and pump, centrifuge, filter bags (0.5 micron) valves and...
  4. BioFarmer93

    WMO and centrifuge system for sale N.E. Fla.

    You're right.. Been a while since I've been on here- forgot about that.
  5. BioFarmer93

    WMO and centrifuge system for sale N.E. Fla.

    Henry has been sold for over a year now, but I still have the entire WMO system and about 150 gal of WMO (some thinned and filtered, some not) sitting in the garage. I need the space now for other endeavors. $200 takes 4 barrels, motor and pump, centrifuge, filter bags (0.5 micron) valves and...
  6. BioFarmer93

    Holley Red are garbage, what else quickly?

    Well, I had a Holley Red in the truck for about 2.5 years (I didn't have to fiddle with a pressure restrictor) then a Holley Black for about 6-7 months (Where I DID have to fiddle with a pressure restrictor). Both were loud, until the engine fired, then their sound was lost to the sound of the...
  7. BioFarmer93

    Henry the Ford has been sold..

    My garage is too cluttered, and among the clutter are four barrels of used motor oil (one is already filtered and thinned) a centrifuge, 0.05 micron polyester felt filter bags, a farm duty 1hp motor mounted with power steering pump, valves, tubing, fittings, final water-block filter with...
  8. BioFarmer93

    HENRY is for sale..

    Maybe, I'll have to dig around and see.. It's caveman simple and works great.
  9. BioFarmer93

    what is a good A/M electric fuel pump for a 6.9l?

    Walbro Industrial E-Lift Pump, FRB-13. Fuel pressure and flow rate are good, Marine rated Coast Guard approved.. Pretty much bullet proof.
  10. BioFarmer93

    HENRY is for sale..

    Yeah, that's Henry.. He has 8 new sleeves with less than 5000 miles on the rebuild, starts ridiculously easy but needs a new throttle cable. Everything is in the description except for the H2 system and the tank for the water injection.
  11. BioFarmer93

    HENRY is for sale..

    He just sits... I don't need him any longer.
  12. BioFarmer93

    HENRY is for sale..

    -And comes with two T2-T3 hybrid turbos, cooler already installed, big box of silicone elbows, clamps, adapters & pieces. Also some O/E parts (if wanted). $2500.00 Jacksonville Florida
  13. BioFarmer93

    PSD vs IDI fuel economy

    Not for a 7.3, you can build a very nice drycell unit for about $300. The burn is faster and specific impulse is improved, so less time to heat the head, cylinder & piston. I have observed NO difference in running temp. Do REAL research and testing like I have before you repeat other people's...
  14. BioFarmer93

    What gauges would you install?

    Primary 3 inside- Volts Mechanical Vacuum Mechanical coolant temp On hood- mechanical oil pressure mechanical fuel pressure My gauges are mix n' match, but I'm not too vain about such things, they just have to be accurate and always work. I do have an ammeter inside coming off of a 150 Amp...
  15. BioFarmer93

    Walbro FRB-13-2 6-8 psi 43 gph

    It works great, but I had to pull it out because I was hauling gravel and it was mounted in the bed. I'm going to update a few parts on it and reinstall as soon as I can use my feet again, next 2 or 3 weeks hopefully..
  16. BioFarmer93

    Walbro FRB-13-2 6-8 psi 43 gph

    Same here, and I run a Goldenrod waterblock filter in front of it to meet warranty requirements. Best pump by far (IMHO)- industrial marine pumps HAVE to be better simply because of their anticipated environment and the lives depending on them. I have it mounted on the passenger side frame rail.
  17. BioFarmer93

    Twin Pyrometers?

    I run twin Auber digital's, and can't imagine why anyone would think that only a single one would suffice on a V style engine.. They are so accurate that I can tell you what the temperature outside is just by flicking on the key (if the engine is cold). With a little creativity you can make it...
  18. BioFarmer93

    89 Navistar 7.3 idi----Learner Question

    I'll probably catch hell from the other guys about this, but it works.. Disconnect the hot wire to your glow plug controller or however your set up is, just make sure they can't glow. With brake set, trans in neutral and key in run position, take off air cleaner cover and give a little spritz of...
  19. BioFarmer93

    Current radiator recommendations?

    I got this three row about 6 years ago, it has worked like a champ the entire time. I checked it over real well the day it got here and was actually impressed with the quality of workmanship. It fit perfectly, so installation was a breeze and it cools well running Fleet Guard and extra SCA's...
  20. BioFarmer93

    My facet mechanical to electric fuel pump conversion review.

    Ah, yes- I'd forgotten about the hard line to the I.P.. Mine has been 3/8" diesel rated hose for so long that it completely slipped my mind. In the photo you can see that my setup is completely off the res, so to speak. I would say "custom", but think it should be prettier to call it that. I...
  21. BioFarmer93

    My facet mechanical to electric fuel pump conversion review.

    Not trying to stir the pot or be argumentative, but shouldn't that Tee be between the filter and IP?
  22. BioFarmer93

    Post up your custom fuel pump/filtration setups....

    No, the stuff I had was pure black, granular and much more regular in size and shape..
  23. BioFarmer93

    Post up your custom fuel pump/filtration setups....

    I don't have a clue, the only thing I can think of that it looked like is black volcanic sand..
  24. BioFarmer93

    Post up your custom fuel pump/filtration setups....

    Ebay- https://www.ebay.com/itm/1165-Aluminum-Radiator-For-Ford-F-Series-Pickup-1983-1994-F250-F350-Diesel/182722697964?fits=Year%3A1989%7CModel%3AF-350%7CMake%3AFord&epid=1622204324&hash=item2a8b1f1aec:g:GRsAAOSwHaZZleql:rk:5:pf:0
  25. BioFarmer93

    Vacuum Warning Switch

    I don't doubt that you are correct, I was fortunate enough to get a good 48 hour warning from my gauge.

Latest posts

Forum statistics

Threads
92,929
Posts
1,155,105
Members
26,430
Latest member
Brownlee5212

Members online

Total: 966 (members: 2, guests: 964)

Share this page

Top