Recent content by Trucker73

  1. Trucker73

    Good Replacement Clutch Manufacturer?

    LUK makes a good clutch
  2. Trucker73

    6.2 locked up?

    Sorry it took so long to reply I had some had a lot things going on and truck went on the back burner. So I pulled the valve covers removed the rocker arms and low and behold it’s a broken exhaust valve. I guess it didn’t take much of turning the crank back and forth to snap it off. So I sent to...
  3. Trucker73

    6.9 idi wiring harness

    I’m really thinking about doing a DT360 swap on this truck and just redoing everything. I’m just not sure if what’s involved in swapping out the 6.9 for the DT360. I just figured if I’m going to take the dash out why not just change out everything. When I got the truck that was the original plan...
  4. Trucker73

    6.9 idi wiring harness

    franklin2 I found a complete harness out of an 84 I got the complete harness that runs from the fuse block and through the fire wall. Past there some of it was butchered and I couldn’t tell what went where but the wires that run under the dash are in good shape where mine burned all under the...
  5. Trucker73

    6.9 idi wiring harness

    dancrowley thanks for the help I appreciate it
  6. Trucker73

    6.9 idi wiring harness

    typ4 yeah I’m lucky it didn’t go up in flames
  7. Trucker73

    6.9 idi wiring harness

    IDIoit thanks for the info
  8. Trucker73

    6.9 idi wiring harness

    Thanks for the info on that harness off eBay I believe I’ll be purchasing one. Do have experience with this particular harness? If so was it pretty straight forward to install?
  9. Trucker73

    6.9 idi wiring harness

    Cedricward I agree you just can’t find a harness for an ‘86. I did find a scrap yard with an ‘87 but I wasn’t sure if it would work. I will buy the manual you mentioned and see if I can’t build it myself. Thanks for your help.
  10. Trucker73

    6.9 idi wiring harness

    DaveBen thanks I’ll take a look.
  11. Trucker73

    6.9 idi wiring harness

    Hello everyone I’m trying to locate a wiring harness for my 86 f250 6.9 idi. The wire going from the FSS on the injection pump burned all the way through the harness in the firewall under the dash all the way to the drivers side of the truck. I wired a manual switch for the FSS truck now starts...
  12. Trucker73

    Wiring meltdown

    Meant to say the truck has never been tampered with it’s all original never a problem but have noticed lately my lights pulsating.
  13. Trucker73

    Wiring meltdown

    Thanks Danielle. The has never been tampered with but it started at the fuel shut off red wire and burned all the way to the harness under the dash. Just can’t figure why it burned at the injection pump. I’m not very good with automotive wiring that’s something that I need to learn.
  14. Trucker73

    Wiring meltdown

    Hello all I need help figuring out what caused my 86 f250’s wiring harness to burn. Looks like it sarted from the red wire on top of the injection pump and burned like a fuse all the way under the dash. I now have no lights or any power. Thanks for your time and help. Possible link to find new...
  15. Trucker73

    6.2 locked up?

    Thanks. So I guess tightening evenly will work
See more

Latest posts

Forum statistics

Threads
91,284
Posts
1,129,796
Members
24,099
Latest member
IDIBronco86

Members online

Total: 735 (members: 7, guests: 728)

Share this page

Top