Nero's latest activity
-
I drove it round doing errands. Got back to the house and the ol boy had a Saturday night bath that's still holding up. Thought he was... -
cookoo
-
-
Yep....stupid.....
-
Nero replied to the thread Maxtow gauges.160°c is about right for a warm engine at idle....
-
Nero replied to the thread Cat 3126 motorhome......IT'S ALIVE!!!!.Older axles did that so the hubs were always turning in the way that 'tightens them down' so the forward mocement didn't loosen the...
-
Nero replied to the thread Maxtow gauges.It is rather blurry... But its probably for 160°f? Or maybe you have it in Celsius :smash:
-
Nero replied to the thread Which replacement injection pump?.For example, my injectors he built one got stuck open directly after install causing mad fuel knock. He had me ship them back and got...
-
Nero replied to the thread Which replacement injection pump?.Justin may be longer than that. He typically does things in batches. I had him build me a pump and a set of injectors, pump was one he...
-
Nero reacted to rreegg's post in the thread 6.9 IDI valve train questions + head gasket job with
Haha.
Is a weld nut a specialty part or just a nut that’s welded to allow bolt to thread? I did an idi water pump this past winter but never... -
Nero replied to the thread 1987 6.9 IDI Losing Prime Overnight.If it help, I have a Napa pump on my truck, but it also is from 2011, quality might be different.
-
Thanks all for the input! Just discovered that the hard line into my lift pump is leaking (pic attached). The vacuum pump was replaced...
-
Nero replied to the thread 6.9 IDI valve train questions + head gasket job.Correct. I think you can still get them, but I went with just regular style seals, so far no issue. I used a basic Felpro upper gasket...
-
Nero replied to the thread 6.9 IDI valve train questions + head gasket job.When I redid my heads and the ones on my dads truck, I just put regular push on stem seals, no need to overcomplicate things.
-
Nero reacted to 8769bigred's post in the thread 6.9 IDI valve train questions + head gasket job with Like.
wow that’s a good deal!! I’ll give them a ring thanks
