Recent content by gearhead143

  1. G

    1993 6.5 problem I've never seen before!

    Finally had time to install the Pyro. Engine up to temp, Idle 200*, Cruise @35mph 400*, @65mph 600*, and at WOT up to 80mph 825*. I didn't have time to try a WOT run on a 6% grade, or with a loaded trailer. I do just get a wisp of smoke when I slam the throttle down and then its gone. I'm still...
  2. G

    1993 6.5 problem I've never seen before!

    They are on the mark, the timing set was installed and double checked, and the IP drive gear was installed X to dot and doubled checked before the cover was installed. As I said the IP and cover marks are about a 1/8in offset to the right. I agree on the pump rebuild and specs, but this one...
  3. G

    1993 6.5 problem I've never seen before!

    Sorry I haven't back with any updates. Ive been working long days and weekends and it hasn't left me with much time to work on the truck. I did purchase a MT480 on ebay for $50.00 less the Lumy probes, and it is in great shape. After talking with many friends across the country I found a guy...
  4. G

    1993 6.5 problem I've never seen before!

    Please let me know what you find. I haven't had time to search the tag numbers yet, and can't get the shop that installed it to talk to me.
  5. G

    1993 6.5 problem I've never seen before!

    The turbo is a Borg warner PN---- 171077 SER--- 03A149130051 BWTS- 171077 Timing is a lot closer now I am at 5* BTDC Now I am convinced that the timing light method is not very accurate. I found a MT480 and going to buy it tonight, only problem the guy now tells me he doesn't have the...
  6. G

    1993 6.5 problem I've never seen before!

    I will check the data tag later this morning as the work day has just started and it will be busy.
  7. G

    1993 6.5 problem I've never seen before!

    All of the engines I rebuilt except for a few had chains in them. When I worked for ODOT in the 90s we rebuilt a lot of these and all had chains.
  8. G

    1993 6.5 problem I've never seen before!

    Are you able to view them now?
  9. G

    1993 6.5 problem I've never seen before!

    Turbo pictures
  10. G

    1993 6.5 problem I've never seen before!

    Ill post them again
  11. G

    1993 6.5 problem I've never seen before!

    Well you are right, 93 never had boost reference waist gate. Why this was done I'm not sure, but it's there. I am wondering if it is a actuator from a 95 or a custom unit. there is a boost gauge in the truck and when I drive it tomorrow I will do some testing. I did drain and flushed the...
  12. G

    1993 6.5 problem I've never seen before!

    Here is the pictures of the Pre-chambers.
  13. G

    1993 6.5 problem I've never seen before!

    Thanks for the reply. I thought this was dead. This truck does have a pressure reference line from the rear bolt in the intake hat to the wast gate. I dont have a MT480, but I do Have a Mac Tool diesel inductive timing lite tool. The timing was at 19* BTDC and I couldn't rotate the IP...
  14. G

    1993 6.5 problem I've never seen before!

    OK I think I figured out how to post the pictures of the injectors.
  15. G

    New here from Salem,Oregon

    Thanks everyone for the warm welcome.
See more

Latest posts

Forum statistics

Threads
91,332
Posts
1,130,503
Members
24,133
Latest member
Nanohawk

Members online

Total: 545 (members: 2, guests: 543)

Share this page

Top