Recent content by CarterDawson

  1. C

    Need a little wiring help

    Yes! This is perfect! Thank you
  2. C

    Need a little wiring help

    I made a post about my 1986 f250 6.9 running like crap a while ango. Ended up being bad fuel pump. Well I decided to swap in a 1993 7.3 turbo because I want more power. I’ve done the 7.3 serpentine setup swap on other bullnose trucks, but not with factory Tach like my truck. I am gonna keep...
  3. C

    SD vs KP D60

    King pin! I only say that because that’s what I put in my truck. Works well. Bolted right in.
  4. C

    So what did you do with your truck today?

    That’s super interesting! Didn’t know it was possible to fix low compression without rebuild :cool:
  5. C

    6.9 IDI running like crap

    Yeah these days it’s tuff for everyone. Hope things change, but I’m not too optimistic :confused: I only have room for 10-12 depending. But I have neighbors, so I’m trying to clean things up. This was this summer, then there’s another 8 or so parking spots to the right I’ve got it looking 100x...
  6. C

    So what did you do with your truck today?

    Thank you Yes! The t19 ones are impossible to find. I had a truck I was doing a motor r&r on this summer, and the release fork was terribly worn. Couldn’t find any online. So I goobered some welds on the pads that contact the throw out bearing. I wasn’t able to use hard facing rod, so we will...
  7. C

    So what did you do with your truck today?

    Interesting! I definitely understand a guy wanting highway gears. Around my here on the PNW coast seems like guys are always looking for low gears for running big tires and wheeling.
  8. C

    6.9 IDI running like crap

    Well I got good and interesting news! I’ve parked the truck as I don’t want to get stranded. Yeasterday I fired it up and drove it from the feild up to my driveway. I pulled the mechanical fuel pump to get another truck running. It ended up running great! Today I went ahead and swapped my...
  9. C

    So what did you do with your truck today?

    I’ll be interested in hearing what gears it has! That sounds super interesting. If it’s anything lower than 4.10s the desirability would go up!
  10. C

    So what did you do with your truck today?

    On the topic of 4x4 1tons, I went a picked this up for $1500 the other day. Kodiak Alaska truck, super rusty! Sat for 9 years. 1987 6.9, zf5, D60 front. Got it running. Gonna keep motor as a spare. Zf5 is going in my white truck I built this summer, as the current zf5 that is in it is terrible...
  11. C

    1987 E-350 W/ 6.9 Deisel / C6 3spd auto

    Yep normal deceleration!
  12. C

    6.9 IDI running like crap

    I’m not bullshitting, I’m driving it today and the clutch master cylinder went out.LOL tomorrow I’m gonna be driving my brothers 85 with the 6.9 to town to get parts. It never ends with these turds:idiot:
  13. C

    6.9 IDI running like crap

    Thank y’all for the help! I’ll drop some coin on a better IP and injectors here next good pay day. I’ll check fuel pressure first. But I’m sure that’s the problem. In the meantime I’ll be driving my 91 with the 7.3. It’s a pile, and needs starter fluid even on hot starts. But it’s got loads of...
  14. C

    6.9 IDI running like crap

    Do you think I could just tap into the bleeder port for my fuel pressure gauge?
  15. C

    6.9 IDI running like crap

    Yeah, I didn’t hear anything bad about the Pensacola Diesel till had already bought it. But I’m not in it much so I could buy another one. Just sucks throwing money at something without knowing the problem. I’ll put a Fuel pressure gauge on it and see what it reads.
See more

Latest posts

Forum statistics

Threads
92,996
Posts
1,155,942
Members
26,575
Latest member
Gerhard

Members online

Total: 1,705 (members: 4, guests: 1,701)

Share this page

Top