divemaster5734
Latest activity Postings About
-
-
divemaster5734 replied to the thread Anyone ever heard of Hi-Tech Engines in Spokane?.All I know about the history is the previous owner had it backed up to a garage door and it didn't move for around 15 years as the 3rd... -
divemaster5734 reacted to typ4's post in the thread Anyone ever heard of Hi-Tech Engines in Spokane? with
Like.
I think they used to be motorworks, if so and its still running you are good. I put in dozens of various engines from them, then all of... -
divemaster5734 posted the thread Anyone ever heard of Hi-Tech Engines in Spokane? in 6.9L IH & 7.3L IDI Diesels.Doing a reseal and detailing a donor 7.3 and discovered a rebuild sticker. Says “Assembled with pride Hi-Tech Engines Spokane...
-
divemaster5734 replied to the thread DB2 Fuel Intake Thread.Oops, 3/8 I didn't expect to, especially with a regulator, but I upgraded all the fuel lines to 3/8" PTFE thinking only of...
-
That happened to me on a crankshaft...I sent it to be checked and I had previously put it in the block and put the timing chain and...
-
divemaster5734 replied to the thread DB2 Fuel Intake Thread.So then, if I was to upgrade to 3/8" from the new regulator to the IP would that make it a 3/8" JIC x 1/2" ORB? Or, a 5/16" JIC to 3/8"...
-
divemaster5734 replied to the thread DB2 Fuel Intake Thread.Thanks
-
Hey, you’re asking about the inlet fitting right? it’s 5/16 ORB with 1/2-20 thread and then the other side of the fitting you choose...
-
divemaster5734 replied to the thread DB2 Fuel Intake Thread.Sent you a PM. Thanks
-
Got my IP back from a CDD rebuild and the fitting at the center intake was removed. Asked them about it and was scolded for not removing...
-
divemaster5734 replied to the thread Ford Says "Hold My Beer".It is possible the truck rolled off the assembly line with the switch mounted on the dash, with everything in place to add an extra tank...
-
divemaster5734 replied to the thread 1989 ZF542 on 7.3 Clutch Interlock.In truth I could just leave the bypass jumper in the connector that's buried above the steering column they used for the E4OD's, which...
-
divemaster5734 replied to the thread Ford Says "Hold My Beer".Yup. I wonder how many of these trucks that went out like this had some random failure that cost unsuspecting owners a lot of grief.
-
-
Tearing out the dash on a 1989 F350 Lariat Centurion conversion today. It's a short body crew cab base with one tank. Found this tank...
-
-
Attached is a extract of the interlock from the Ford service manual for 1989, all E and F series. It shows two clips, one orientation...
-
-
Loading…
-
Loading…
