89ford
Full Access Member
Hey guys my truck I think I've overtightened all of my metal lines going from the ip and I think I need all of the lines anyone have a set they want rid of?
need fuel lines
- Thread starter 89ford
- Start date
Pretty hard to over tighten.
Have you got the line clamps on? Both sides.
If leaking, where? IP or injectors or both?
Stripped threads?
New lines are expensive, about $50 ea line. Try ebay. Pick and pull junk yard.
FordGuy100
Registered User
The lines won't get messed up, it's the threads on the injectors that will strip out.
icanfixall
Official GMM hand model
What makes you feel the hard lines are bad... Usually the fuel leaks at the injectors is from the plastic return lines. The kits are easy to install. Plenty of information here.. Just ask. As posted above.... Both sides of the engine have two line clamps on the hard lines.... If they are missing you will crack a line near an injector.... Usually number 2 is the one that breaks. Its also the most difficult to install.
BioFarmer93
OPEC Hater
89ford
Full Access Member
well the flare on the injector pump end is messed up has nothing to do with the threads
Similar threads
