I have an 2wd 86 f250 extented cab 6.9 4sp 3.55 gears that I have been trying to get together. The flat bed needs mounted yet and the truck could use some paint(suface rust starting on the hood and roof) and I replaced the engine with another 6.9 with unknown mileage but it runs great and starts right up. I was going to ask $2500 after I would have it repainted and completely done. I bought the truck with a blown engine because I wanted the bed for my truck. I have my old bed yet but it is rusted out over the wheel wells if wanted. The truck was a Geogia truck so the cab corners are rust free. The cowl was rusted out from pine needles but I had an old cab that i cut that out of and replaced it. Not the best weld job but could be easily cleaned up if you wanted to. I will see if I can get some pictures and figure out what I want as it is now. Also it has many new parts, charging regulator, glow plug relay, glow plug controller, Motorcraft glow plugs, heater blower resister, blower motor and others. Pm me if interested.