fuel tank sending unitl repair option.....

[towcat]

I've see this company advertise in a few of the trade rags that come to my shop. don't know anything about them, but for those who have bad sending units, this might be your solution.
http://www.fuelsender.com/services.html
So who wants to be the first lab rat?

 

[HammerDown]

"Most repairs between $45 - $155 "
My luck mine would be close to $155...because it's a DIESEL

I've got 2 new ones sitting at my local Ford for $93 each.

And at this years BOOB Rally were gonna yank my bed off and put them in...right fellas

 

[towcat]

try finding one for the 80-86 models.

 

[rkpatt]

A capacitance type sending unit might be a better option ( no moving parts ) .

- http://www.centroidproducts.com/tableofc.htm

 

[sassyrel]

orrrrrrr--when i was having this problem--i happened to have a gasser pickup handy--took a look--yep--the board with the copper?? strips on it was bad-- and the gasser was the same--you only have to be careful how you take it apart--and what wire to disconnect--as one wire is made of something i couldnt solder--so i just left the one wire long--stripped both--and twisted them as tight as i could without breaking--still working 8 years later!!!!!!!!!!!!!

 

[Dsl_Dog_Treat]

"Most repairs between $45 - $155 "
My luck mine would be close to $155...because it's a DIESEL

I've got 2 new ones sitting at my local Ford for $93 each.

And at this years BOOB Rally were gonna yank my bed off and put them in...right fellas

I've got skinny enough arms to get that front tank sender out without dropping the tank or yankin the bed. Now that back one is a different story.

I'll have my assortment of tools tho, just PB blast the snot out of them bed bolts a few weeks out.