icanfixall
Official GMM hand model
This is a great time to show some pics of the front cover. In the first pic you can see 3 nuts around the crank damper main seal.
Those are there to use the special tool to install the seal. That tool works very well too. Also look at the timing tab. See the short and the tall mag probe tubes. The one we use in timing is the tall skinny one. Now look at pic 2. See those top and bottom flat nuts. Those are the ones that hold the water pump to this cover. they are soft material and can strip out easily. Watch how you tighten these 4 bolts. Also know these require a special short bolt or the bolt will jam the timing gear and rub the hell out of it. There is plenty more but this is the important stuff for now.
http://www.ebay.com/itm/7-3-IDI-Timing-Cover-1994-F250-F350-6-9-/301690710044?hash=item463e2ae81c
Those are there to use the special tool to install the seal. That tool works very well too. Also look at the timing tab. See the short and the tall mag probe tubes. The one we use in timing is the tall skinny one. Now look at pic 2. See those top and bottom flat nuts. Those are the ones that hold the water pump to this cover. they are soft material and can strip out easily. Watch how you tighten these 4 bolts. Also know these require a special short bolt or the bolt will jam the timing gear and rub the hell out of it. There is plenty more but this is the important stuff for now.
http://www.ebay.com/itm/7-3-IDI-Timing-Cover-1994-F250-F350-6-9-/301690710044?hash=item463e2ae81c