Double Cardan Front Driveshaft Parts

[david85]

I'm plodding along with my 4wd conversion and realized yesterday that the front driveshaft needs some work. This came out of a 1996 F350 that had the double cardan style u-joint. I've looked online and have a general idea of how they work but I'm having a hard time identifying the correct center bearing to get for the double cardan section.

Can anyone share a link, source or way to identify what I need to order?

 

[david85]

Hmm....well according to this, it seems to fit multiple applications:
https://torqueking.com/product/40744/qu40744-cv-ball-and-seal-kit-for-spicer-type-cv-driveshafts/

Does this look right? Part Number: QU40744

 

[79jasper]

Iirc, bronco graveyard has them. Pretty sure that's where I ordered mine. But I got the yoke or flange, as mine was destroyed.

Sent from my SM-G988U using Tapatalk

 

[u2slow]

I have bought Precision/Moog #617 for these inner CV parts before. They are Spicer 1330 based stuff.

 

[david85]

Cool, that gives two part numbers that might work.

Moog 617 (found on Amazon.ca)
Spicer? QU40744

I'll try the local parts store first. If that doesn't work, bronco graveyard should work.

 

[u2slow]

Rockauto says Spicer 10018440

 

[david85]

Shows out of stock on rockauto (on my end, at least), but it's one more part number to work with.

 

[u2slow]

Couple more from rockauto... looked under 95 Bronco

GMB 2610617
ACDELCO 45U0708

 

[chillman88]

How did you make out with this? I'll be looking at this pretty soon myself. I see this one on RockAuto but haven't done any other looking yet.

You must be registered for see images attach

 

[david85]

I ended up just ordering a whole drive shaft. The old one was too far gone.