tgomes
Full Access Member
I am currently looking at purchasing a used Banks Sidewinder kit. It was bought in 2007 installed in 2010 and the truck has been parked since 2012. It is complete no missing parts whatsoever. My issue is with the shaft play and a small puddle of oil sitting in the bottom of the compressor housing. I have attached a video and a picture. My thought on the oil are that it may have seeped out from sitting for such a long time. There seems to be a small score mark/ scratch on the compressor housing by the wheel. It is very small and only in one spot. There is no in and out play only side to side. When putting pressure on the shaft while spinning it does not touch the housing but you can feel drag. If spinning the shaft with no pressure added it spins very freely. I don't see how it could be worn out so quickly seeing that it has seen very little use. Any input on this would be greatly appreciated.
https://youtu.be/zqsrpu_xEfw
https://youtu.be/zqsrpu_xEfw
You must be registered for see images attach
You must be registered for see images attach