6.5l head torque sequence

[mvmuleman]

I removed the heads on the non turbo military "rebuilt" engine I installed after 500 miles in my M998 due to bubbles of oil appearing at the seam between the head and the block below the glow plugs and injectors. The manuals I have are for the 6.2l engine. does anyone have the latest torque values for the heads, intake mainfold, exhaust manifolds and valve cover gaskets handy?
Thanks,
Nick

 

[towcat]

see sequence pic below.
torque values.....
1) first value 20ft lb
2) 2nd value 55ft lb
3) clock bolts 90 deg clockwise.

You must be registered for see images attach

 

[Black dawg]

when it gets to the final 90deg, I always put a paint marker mark on each headbolt head so that you can see it was turned 90deg. It is pretty easy to miss one with that many bolts.

 

[Dieselcrawler]

i do same thing, but take it to the next step. i have many different colors, put a little mark on each bolt after torquing it for each pass. that way in the end i should see 3 colors on each bolt knowing i got every one.