gonecrazyi
Full Access Member
I'm working on a 30ft motor home based on a 2001 e450 van chassis with a v10.
The symptoms are the pedal slowly sinking to the floor. the front brakes easily lock up but the tears don't seem to grab hard. There is plants of pressure and flow at each wheel and I. Getting no air bubbles.
I've replaced the master with a new unit and bled the brakes. I have also replaced the rear calipers and shoes. In lost as to why the pedal still sinks and the rear brakes aren't working correctly.
Any ides would be great. I'm thinking the ABS unit is bad.
The symptoms are the pedal slowly sinking to the floor. the front brakes easily lock up but the tears don't seem to grab hard. There is plants of pressure and flow at each wheel and I. Getting no air bubbles.
I've replaced the master with a new unit and bled the brakes. I have also replaced the rear calipers and shoes. In lost as to why the pedal still sinks and the rear brakes aren't working correctly.
Any ides would be great. I'm thinking the ABS unit is bad.