Search results

  1. CSARebel916

    38 gallon rear tanks....

    What about your sending unit? I really want to put a bigger tank in my CC, but I have to have my fuel gauge working. I saw one thread on here about someone who did lengthen theirs, but it wasn't much of a write up. Do you plan on doing anything for this issue??
  2. CSARebel916

    Snap on or Craftsman tools?

    I'm going to weigh in on this. I started out with Craftsman tools, but as soon as I started to use them everyday I learned very quick that Craftsman weren't going to cut it. I have been turning wrenches professionally for over 10 years now. I have only 2 socket rails of Craftsman sockets in...
  3. CSARebel916

    6.9 Aluminum 4-speed bellhousing

    do you still have the clutch and flywheel? If so, please email me at [email protected] I am very intrested. Thanks Chris
  4. CSARebel916

    Diesel ZF5 4x4 and swap parts $700

    Do u have the steering column also? Just blew the E4OD outta the truck for the 3rd time. Deff need this setup
  5. CSARebel916

    Diesel 4x4 ZF-5 out of a '91 F-Superduty $600

    Do u still have this trans? My friends E4OD went out, and she needs everything to convert he truck over to 5 spd. How much do u want for everything?
  6. CSARebel916

    Building a centrifuge?

    Ok, your sayin remote mount. How would I get the oil from the bottom of the fuge back into the drum? Would you be willing to send me some pics of your setup? I know some people are worried about doing that, but I could send u pics of my lil setup too lol
  7. CSARebel916

    Building a centrifuge?

    I used to run my mix in my regular fuel tanks, but I now have a 55gal "L" tank in my bed. I was thinking of running a coolant line back to it, to warm the oil. From everything I have watched, in the last 2 hours, I think the fuge is deff gunna be the way to go. With my main prefilter, I dont...
  8. CSARebel916

    Building a centrifuge?

    Ok, since you live in CO, obviously it gets cold out there. Do you run that mixture all year long? I normally run about a 40% WMO to 60% thinner in winter. In summer i will run whatever I can lol.
  9. CSARebel916

    Building a centrifuge?

    Im actually sitting here watching all of their videos. Do these things work as well as they say? Im just skeptical, dunno why, but am lol I like to make 55-60 gals at a time. If it takes me 4 hrs, im fine with that.
  10. CSARebel916

    Building a centrifuge?

    Ok, im not new to running WMO/k1 or diesel or rug. I have been doing it for about 5-6 years. Well its time to build another unit, I do this every couple years. I plan on building a heated holding tank, but instead of running 2 water filters like I have in the past, I want to try and build a...
  11. CSARebel916

    Huge front bumper

    I wish you werent on the otherside of the country lol!
  12. CSARebel916

    WTB seats

    I have buckets and a center counsel out of a 91 F250 ext cab. shippin maybe a lil much though
  13. CSARebel916

    What do you think? Feelin stacks?

    I think if the stacks are done right then they dont look bad. If you do decide to put stacks in please god, put two stacks!!!! 1 stack just doesnt look right, IMHO. Heres a pic of my 85 Ext Cab with 4in black stacks and stack flappers, lol.
  14. CSARebel916

    TTB 50 and Misc 6.9/7.3 Parts

    TTT No one needs anything?? Please make an offer!
  15. CSARebel916

    6.9 IDI in a '78 F150

    I put a 6.9 in my 79 F-150 about 4-5 yrs ago. I dont have any pictures of the process, Im not one to like pics lol. The biggest problem I ran into was the motor mounts. I used to short side frame mounts, and modified my factory motor mounts. Also you will need to install a 3in body lift so...
  16. CSARebel916

    TTB 50 and Misc 6.9/7.3 Parts

    Well changing jobs hurt me pretty bad. Gotta off some surplus I have built up. All prices are OBO, just ask and I will respond, Thanks. 6.9/7.3 Intakes - 3 avail - 35.00ea IP Timing Gears - 4 avail - 15.00ea IP Timing Covers - 3 6.9, 1 7.3 - 20.00ea Giant Pile of Injection Lines -...
  17. CSARebel916

    Parting Out F350 Dually 4x4 cab N chassie

    How much for the trans, tcase, and floor plate? I can pick it up, prob be cheaper than shipping. Thanks Chris
  18. CSARebel916

    I did it now! My Project 2011 (long)

    Your wiring kinda looks like mine did! Have fun, it took me almost 9 hours to rewire everything. Good Luck!
  19. CSARebel916

    Lift pics

    The front springs will get you about 4in of lift. You will need to drop your axle down if you plan on running those springs with your ttb axle.
  20. CSARebel916

    4.10 and 3.55 comparison.

    I wonder how much of a differance id see if I put 3:55s in my truck? I dont have a 5spd, I have an old crusty C-6 lol. I crank 2500-2600 at 60 mph and 3000-3100 at 70mph. I drive almost 75 miles round trip for work, and all but 3 miles is highway driving. Ive thought of putting 36's under my...
  21. CSARebel916

    Fuel Tank Vaccum???

    Thats what I was thinking. Im gonna try tomorrow, and see if i can reach the top of the tank, and pull it out.
  22. CSARebel916

    Fuel Tank Vaccum???

    Ok im a little lost here. Im working on the truck in my signiture. I see to have developed a vaccum in my front tank. Doesnt matter how full/empty the tank is, but if you remove the fuel cap, it makes a woosh sound. I have swapped caps and it still does it. Correct me if im wrong, but dont...
  23. CSARebel916

    FS 2003 6.0 with Trans & Tcase

    Im always open to offers! I just need to get it out of my garage, give a call if ya would like. Thanks
  24. CSARebel916

    FS 2003 6.0 with Trans & Tcase

    Nope sorry. It disapeared a long time ago lol
  25. CSARebel916

    FS 2003 6.0 with Trans & Tcase

    I have a 03 6.0 diesel engine with 128k miles. Engine is complete but has no wiring. The oil pan and turbo were taken off so it could be removed from the truck without taking the cab off. It has an after market intake and aftermarket 4in down pipe. Also in this deal, you get the torque shift...

Latest posts

Forum statistics

Threads
91,305
Posts
1,130,016
Members
24,115
Latest member
Tyler9828

Members online

Total: 742 (members: 6, guests: 736)

Share this page

Top