Search results

  1. prepowerstroke

    Dual mass flywheel

    Okay that's what i needed to know thanks guys and one last question do any of you guys know the length for the rear driveshaft for a 4x4 5speed single cab long bed? Sent from my iPhone using Tapatalk
  2. prepowerstroke

    Dual mass flywheel

    Well this flywheel has 3/4 inch of slop back and forth so its toast? Sent from my iPhone using Tapatalk
  3. prepowerstroke

    Dual mass flywheel

    Hey guys im converting my truck to a 5speed and the doner truck had a decent looking dual mass clutch. How do i tell of the flywheel is in good shape? i have a SMF for it but if i can save some money by reusing the old clutch for now i will to get the truck back on the road i will change it out...
  4. prepowerstroke

    Injection pump help

    Well i just strapped a 5 gal can to the front of the truck for now with fuel lines in it so i could move it. Ill be going back to college tomorrow so it will be sitting in the yard till i get back in a couple months, thanks for all your help truck starts and runs great fires right up first crank...
  5. prepowerstroke

    Injection pump help

    Anybody ever ran a temporary fuel tank in the bed so it is runnable for now? Sent from my iPhone using Tapatalk
  6. prepowerstroke

    Injection pump help

    I might try blowing through the lines tonight to see if i can get it running again so i can get it out of the drive way. I dont want to drop the tanks with them being full still because my truck wont fit in the shop so i have to do stuff in the gravel. Sent from my iPhone using Tapatalk
  7. prepowerstroke

    Injection pump help

    Well my truck died today both tanks are full of fuel, was running then it died so i filled my filter primped the pump and it started but wouldnt pick up fuel one either tank? (Primed and got running again multiple times no go) the filter has air pressure so i know the lift pumps pumping. There...
  8. prepowerstroke

    Injection pump help

    Buddy of mine has the 90cc pump from R&D and stage one injectors he has the banks sidewinder kit with a wicked wheel and he said it will build about 25psi of boost no studs lol Sent from my iPhone using Tapatalk
  9. prepowerstroke

    Injection pump help

    What was your max boost with your stock maxed pump Pelky350? Mine was right 10 psi on a good day Sent from my iPhone using Tapatalk
  10. prepowerstroke

    Injection pump help

    Does anyone know if i put a R&D wicked wheel on my 088 kit and bigger injection pump if it will spool better and make more boost Sent from my iPhone using Tapatalk
  11. prepowerstroke

    Injection pump help

    Well thanks for the help guys i got it on and she sounds good Sent from my iPhone using Tapatalk
  12. prepowerstroke

    6.9 Superduty

    What is the ideal timing on these engines? Sent from my iPhone using Tapatalk
  13. prepowerstroke

    Injection pump help

    Hello guys im getting ready to buy another idi truck its a 1993 f250 4x4 extra cab and the guy im buying it from had removed the injection pump and gear housing. He is giving me the pump and housing and gear with it but how do i time it to the cam? I would suppose there would be dots on the...
  14. prepowerstroke

    6.9 Superduty

    Just out if curiosity what did you set the timing to? I was always told between 8.5-9.5 degrees before tdc Sent from my iPhone using Tapatalk
  15. prepowerstroke

    Running rough, no power??

    It uses about half a gallon a month Sent from my iPhone using Tapatalk
  16. prepowerstroke

    CDR valve

    Okay thanks guys and I seen a guy run his cdr into his exhaust? Is there any benifit to this? Sent from my iPhone using Tapatalk
  17. prepowerstroke

    Running rough, no power??

    It does use some oil but it's not bad Sent from my iPhone using Tapatalk
  18. prepowerstroke

    CDR valve

    Alright thanks guys. So even though the valley pan is poped up it will be okay? Just gotta poke the holes in the baffle Sent from my iPhone using Tapatalk
  19. prepowerstroke

    CDR valve

    Would I just makes a adapter for the front of the gear case like the banks kit? I'm getting tired of the oil fuems in my cab lol Sent from my iPhone using Tapatalk
  20. prepowerstroke

    CDR valve

    And after I poke the holes in te baffle with the valley pan be alright or does it need replaced? Sent from my iPhone using Tapatalk
  21. prepowerstroke

    CDR valve

    Alright could I run a road draft tube? Sent from my iPhone using Tapatalk
  22. prepowerstroke

    CDR valve

    Hey guys I just bought a 088 ats turbo kit for 150 bucks and I installed it the other day. I guess I didn't relize that when I took CDR off that it would build crank case pressure. When I get it donw I started up to let it run to check for leaks, then it started leaking really bad. I opened the...
  23. prepowerstroke

    Running rough, no power??

    Sorry it's been a while guys I've been installing the turbo on my idi[emoji41]. We have run oil additive and no difference ICP looks good and doesn't run any better unplugged. I read some where that bad injector o rings would leave a black fuel filter? Sent from my iPhone using Tapatalk
  24. prepowerstroke

    Running rough, no power??

    Does use little oil not sure if it's leaking it or not though an the check engine light only comes on sometimes but when it comes on the truck runs better. I had my buddy put his snap on scanner on it and he ran the buzz test and all of them sounded kinda weak but he said it wouldn't bring up...
  25. prepowerstroke

    Running rough, no power??

    Sorry forgot to say already replaced glow plugs glow plug controller(try to fix starting issue) and both valve cover gaskets and pig tails Sent from my iPhone using Tapatalk

Latest posts

Forum statistics

Threads
91,301
Posts
1,129,947
Members
24,110
Latest member
Lance

Members online

Total: 567 (members: 2, guests: 565)

Share this page

Top