Sinsectan
Registered User
I've removed the heads to have them machined, and have cleaned off the deck on the block nicely. The only problem is that small bits of head gasket debris are stuck between the piston and cylinder wall. I'm guessing they're going to get chucked out the exhaust port, but I'm not sure. Regardless, I've slid brass feeler gauges between the piston and cylinder wall to try flicking the tiny bits out, but it doesn't work well at all.
Looking for advice as how I could get these tiny flakes out or if I'm largely in the clear.
Thanks in advance.
Looking for advice as how I could get these tiny flakes out or if I'm largely in the clear.
Thanks in advance.