Recent content by bryand
-
B
Exhaust Help
Does any one know a part # for a 5" taipipe avalible from NAPA, If there is one. I know there is a 4" avalible. I thought I read that a 5" was avalible. Any and all help is appreciated.- bryand
- Thread
- Replies: 1
- Forum: 6.9L IH & 7.3L IDI Diesels
-
B
Toyo M/T tires
I have the toyos on my truck and the are great. i mainly drive on the street not to much off roading. Excellent traction wet or dry. Great road manners. I have about 40000 mi on them now and almost time for new tires. You might be able to clear a 315 with a little shimming on the front bumper...- bryand
- Post #16
- Forum: 6.9L IH & 7.3L IDI Diesels
-
B
Inside Door Handles
check the door itself. It will be cracked or broken behind where the handle attaches to the door. Its a common problem. there is a fix by using a 5/16 fender washer trimmed a little. Inserted between the captured nut and door, I think. I'm sure somene will chime in with a link or another source.- bryand
- Post #5
- Forum: 6.9L IH & 7.3L IDI Diesels
-
B
AF in Oil
I'd start with the oil cooler. Not to be the bearer of bad news could also be head gaskets??- bryand
- Post #2
- Forum: 6.9L IH & 7.3L IDI Diesels
-
B
Getting Air in Fuel System
I have not fixed it yet I have to out of town for 2 weeks today will fix when i return, I don't have to drive the truck much, but that will change soon.- bryand
- Post #11
- Forum: 6.9L IH & 7.3L IDI Diesels
-
B
Getting Air in Fuel System
thats the advance piston- bryand
- Post #7
- Forum: 6.9L IH & 7.3L IDI Diesels
-
B
Getting Air in Fuel System
I'm sure its leaking from those places. thanks for the info. I'll try Seattle injector tomorrow. thanks for the info- bryand
- Post #3
- Forum: 6.9L IH & 7.3L IDI Diesels
-
B
Getting Air in Fuel System
Does anyone know where or if I can get IP parts, specificly throttle shaft o-ring and advance piston seal. The pump is a DPS turbo cal pump with about 30,000 miles on it and is about 2 yrs old. Spoke to Ken about getting parts, but thats about as far as it went. Thanks for looking. Bryan- bryand
- Thread
- Replies: 11
- Forum: 6.9L IH & 7.3L IDI Diesels
-
B
No Start problem
I went out to start truck and it would not fire. After looking around I noticed that the wait to start light would cycle and not dim the lights. I'm thinking it could be the relay on the controller. I have not performed any check as it was dark out. Will investigate more tomorrow. Is the relay...- bryand
- Thread
- Replies: 3
- Forum: 6.9L IH & 7.3L IDI Diesels
-
B
Custombatterycables.com HOW LONG DID IT TAKE?
I ordered a set late Oct. received in about 3 wks. well worth the wait, great quality and fit.- bryand
- Post #11
- Forum: 6.9L IH & 7.3L IDI Diesels
-
B
tailshaft bushing.
Go to a trans shop they should have it. I have a friend that builds tranny's and has all sorts of bushings in a box just sitting around hope this helps.- bryand
- Post #4
- Forum: 6.9L IH & 7.3L IDI Diesels
-
B
shift kit e4od
I use the sonnax. take a look @ http://www.transmissioncenter.net/e4od.htm. site used for reference.- bryand
- Post #3
- Forum: 6.9L IH & 7.3L IDI Diesels
-
B
Yet another Ebay ATS turbo
Is that a crack on the turbine inlet housung?- bryand
- Post #6
- Forum: 6.9L IH & 7.3L IDI Diesels
-
B
Want to buy guages & pillar pod - - where?
I purchaced 3 guages and A-pillar pod for around $230.00 + shipping(not a typo) in kit form from www.rpmoutlet.com- bryand
- Post #6
- Forum: 6.9L IH & 7.3L IDI Diesels
-
B
Another oddball IDI on EBay
I have seen this truck last year. Its huge!- bryand
- Post #11
- Forum: 6.9L IH & 7.3L IDI Diesels
