Does any one know a part # for a 5" taipipe avalible from NAPA, If there is one. I know there is a 4" avalible. I thought I read that a 5" was avalible. Any and all help is appreciated.
I have the toyos on my truck and the are great. i mainly drive on the street not to much off roading. Excellent traction wet or dry. Great road manners. I have about 40000 mi on them now and almost time for new tires. You might be able to clear a 315 with a little shimming on the front bumper...
check the door itself. It will be cracked or broken behind where the handle attaches to the door. Its a common problem. there is a fix by using a 5/16 fender washer trimmed a little. Inserted between the captured nut and door, I think. I'm sure somene will chime in with a link or another source.
I have not fixed it yet I have to out of town for 2 weeks today will fix when i return, I don't have to drive the truck much, but that will change soon.
Does anyone know where or if I can get IP parts, specificly throttle shaft o-ring and advance piston seal. The pump is a DPS turbo cal pump with about 30,000 miles on it and is about 2 yrs old. Spoke to Ken about getting parts, but thats about as far as it went. Thanks for looking.
Bryan
I went out to start truck and it would not fire. After looking around I noticed that the wait to start light would cycle and not dim the lights. I'm thinking it could be the relay on the controller. I have not performed any check as it was dark out. Will investigate more tomorrow. Is the relay...
Go to a trans shop they should have it. I have a friend that builds tranny's and has all sorts of bushings in a box just sitting around hope this helps.
what about clipping turbine wheel. I used to have a import gasser that you could order a clipped turbine wheel for the new turbo for faster spool up. It was just a 10* or 15* machining of the exit side of the turbine wheel.
For some time I have been thinking about changing the exhaust system on my truck and wanted opinions on putting dual 5" stacks or a single 4" conventional exhaust on my truck. Are there any pros or cons? I really like the look of stacks and can get 5" x 48" miter cut stacks for 69.00 ea...
try looking from the top it may be the return line to the tank. I had a similar leak. ther is a tee back there behind the last inj. on the drivers side. hope this helps bryan
Gabby it took me about 3.5 hrs. really not a bad job just take your time and be patient. Hint to help remember where things belong take some digital pics. I use to be an automotive mechanic for 11 yrs. Go for it
I'm fairly new to this forum but I have learned a lot from the many posts that I have read. I just received my new ip and injectors. I installed myself and what a difference in made in the way my truck performed. I have searched for tips on procedures for timing by ear and wanted to know if...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.